Jump to content

ryanotown22

Members
  • Content Count

    156
  • Joined

  • Last visited

Everything posted by ryanotown22

  1. Ok no problem let me know when your back there Sent from my iPhone using Tapatalk
  2. New pin arrived today in the mail it’s copper color unlike the one I took out that was silver but it fits perfect no play at all between the arm and the rod. I also was able to straighten out the rod pretty easily. Now I am just waiting on my o rings from courtesynissan to ship before I can put it together again. Sent from my iPhone using Tapatalk
  3. Yes rotella. I know a lot of people that run that. Sent from my iPhone using Tapatalk
  4. Any chance the 280z has the engine bay light or the radiator overflow tank or steering column clamshell? I need any of those. Sent from my iPhone using Tapatalk
  5. Rotol T4 15w-40 wish that was tested Sent from my iPhone using Tapatalk
  6. Everything looks good the rod is a little bent from all my hammering but nothing I can’t straighten. The little arm where the bolt goes through does have a little damage from the drill but it’s not on the rod side so I don’t think it will affect use. I have another bolt arriving Tuesday so I will know then. The slot on the rod where the bolt locks into is also fine Sent from my iPhone using Tapatalk
  7. Well it’s not my proudest moment but it’s out took a 90 degree drill and lots of bits Sent from my iPhone using Tapatalk
  8. I haven’t tried the double nut idea yet. I am in AZ and dealing with a 120 degree garage so I only work for a little bit in the morning. Do you think once I get it out if replacing it with a regular bolt would be ok? Sent from my iPhone using Tapatalk
  9. This on on the same list with removing spindle pins as a headache.. you would think there would be a better design.. of course the fsm just says remove striking arm bolt.. I am surprised it doesn’t show a finger just pushing it out. I am giving in and going to try and take it somewhere. At least on the later 5speeds you have a way to get to it via the reverse lockout hole in the case. Sent from my iPhone using Tapatalk
  10. Tried the steel bar method and hitting it with a 5# hammer still not budging going to try the freeze method next after I pick up some dust off Sent from my iPhone using Tapatalk
  11. Nope not budging tried heat also. I wonder what the official tool/method was. It seems a tool like a bike chain pin remover would be great but those are too small. Sent from my iPhone using Tapatalk
  12. Ok yeah I just beat it off the dowel pins with a rubber mallet now onto second problem. How do I get this bolt out so I can remove the striking rod? I saw in your video the transmission has a port and you could just knock it out. Looks like the 77-78 does not have that port so there is almost no room in there Sent from my iPhone using Tapatalk
  13. I Removed the 8 12mm bolts from the tail housing, I also removed the little pin with the c clip. What do I have to do next to separate the tail section? The striker arm now moves out about an inch or 2 inches. Sent from my iPhone using Tapatalk
  14. Sent from my iPhone using Tapatalk
  15. There is a lot of what the carp going on in that bay Sent from my iPhone using Tapatalk
  16. What is the best way to stop the rust in the inspection lid hinge? Sent from my iPhone using Tapatalk
  17. My back driver side brake kept getting stuck.. I switched to rear disk brakes because I don’t understand that drum brake black magic that’s going on inside there all hidden from view Sent from my iPhone using Tapatalk
  18. Well ok then upping the ante how about windshield A pillar plastic panels :-) for 77-78 Sent from my iPhone using Tapatalk
  19. anyone out there 3D printing the 77-78 steering column cover clamshell it’s impossible to find the bottom piece and seems like it could be printed or at least something close to similar. Sent from my iPhone using Tapatalk
  20. I believe that symbol is on the back of cars in Japan of a new or old driver to alert other drivers to be careful around them Sent from my iPhone using Tapatalk
  21. I could use the driver side door Sent from my iPhone using Tapatalk
  22. Toolbox was saved before catastrophe Sent from my iPhone using Tapatalk
  23. White snorkle Sent from my iPhone using Tapatalk
  24. Interesting indeed. I didn’t know you had a choice between metal or fiberglass headlight buckets if you wanted. Sent from my iPhone using Tapatalk
  25. Dear god don’t let that dashboard see the sunlight it’s beutiful Sent from my iPhone using Tapatalk
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.