AZDatsun

Any idea what the best way to strip these to prep for paint? The previous owner put on paint that is chipping and flaming away and I want to get it down to have a reliable base for primer. Sent from my iPhone using Tapatalk

Anyone know the correct door gap between fender and front edge of door I can’t seem to find it online. Sent from my iPhone using Tapatalk

The one I ordered worked your right it doesn’t fit flat against the bottom but it does get more than enough threads through and with a little thread locket it’s not going anywhere.. now if I can get myself a new cap.. Sent from my iPhone using Tapatalk

How many amps does the switch need to support? Sent from my iPhone using Tapatalk

My switch arrived today went out to change it and my Bulb cover is totally not there.. I don’t get it just disintegrated I guess.. went back inside in anger. Sent from my iPhone using Tapatalk

Does anyone have a web link to the more modern metal toggle that will work I think a lot of us have broken toggles Sent from my iPhone using Tapatalk

I went through this over summer.. the final solution was this attachment and buying a new wedge pin Sent from my iPhone using Tapatalk

I just went through this over the summer take off the sway bar first it gives you just a little more room. Then you have to slip a wrench up there. Lock the drive shaft so it doesn’t spin and make sure your actually turning the wrench the correct direction since you will be facing the opposite way most likely. I almost gave up multiple times Sent from my iPhone using Tapatalk

Someone was in the Christmas spirit Sent from my iPhone using Tapatalk

Ok the 90’s ones are easier to find for sure... good catch! Sent from my iPhone using Tapatalk

They are from late 80’s pathfinders https://www.rockauto.com/en/catalog/nissan,1987,pathfinder,3.0l+v6,1211768,exhaust+&+emission,vapor+canister,5180 Sent from my iPhone using Tapatalk

The fit was good i wouldn’t have suspected it was not factory Sent from my iPhone using Tapatalk

I found this marking on my fender after I stripped it of paint. Anyone seen this before Sent from my iPhone using Tapatalk

What color is that? Any interior pics Sent from my iPhone using Tapatalk

No only if you use it on mondays and fridays you need the upgrade Sent from my iPhone using Tapatalk

It screws into the side of the transmission should have two wires coming off it Sent from my iPhone using Tapatalk

Ok I gotta be the dumb one but what is that shirt calculating Sent from my iPhone using Tapatalk

Still looking for 77-78 radiator overflow tank and mounting bracket or steering column clamshell plastic Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Do you have any model numbers for those maxi fuse blocks I am looking to do the same wiring with my fusible links Sent from my iPhone using Tapatalk

Put both engines back in.. inline 12.. although 2x6 would probably fit easier Sent from my iPhone using Tapatalk

It’s actually made by “JECS” and that is oem Sent from my iPhone using Tapatalk

Yes this is an example of that he used an Eastwood metal brake and made them Sent from my iPhone using Tapatalk

Next I need to find a plastic light lens cover Sent from my iPhone using Tapatalk

Awesome that’s what I was looking for ! I don’t need to match but maybe I will paint it white like the original Sent from my iPhone using Tapatalk