texasz

UPDATE: Ok, I took the battery in to be tested and it tested out ok and took a charge at the shop. Came home, cleaned up the battery posts, cables etc and tried again. I get one click when I turn the key and nothing else! The battery gauge in the dash reads good and strong, but everytime I tried the key all I got was one click. Any more ideas???

Does the power antena work? Would you be willing to split it from the radio and if so how much?

I tried starting my car a week ago and the battery was not so good so I hooked it up to my truck to jump it...however I never did get it to turn over. But it was acting correct when trying to start. I just tried again yesterday after replacing the plugs and having it on a charger 1/2 the day then switching the charger over from charge mode to start mode (a 50 amp output). All I got was a clicking noise. NO attempt to turn over on the car's part at all. I once knew what this problem was several years ago but now I can't remember. Can anyone out there help be diagnose this problem so I can get it fixed ASAP. I have a few other things to do to it before a car show on 3/20 and don't have much time to do it all.

Still nobody has confirmed that this will work on a 240Z. Anyone know for sure? I still want it ONLY if it will work on my 240Z, otherwise it would be of no use to me.

I found a thread that gave this information What I need to know is I have a stock L24 with an E31 head. I have blow-by on cyl 5, and my compression is as follows from cyl 1 to 6: 120, 120, 120, 120, 40, 120. My rear carb will not tune quite right, it runs rich all the time (probably needs rebuilt) but the front carb is in good tune. I just need a 'short term' solution here since I'll be replacing the engine this year (I hope). What plug would be best for my car? The plugs always seem to foul so I will end up replacing them on a regular basis after doing some driving then letting it sit for a while, or doing a lot of driving. So really expensive plugs, like $8/each, are a bad choice unless they will not foul (yeah, right). Any help on this would be great!! Thanx guys & gals!! :classic:

The pic didn't stay attached, let's try again.

I'm looking for the hatch vents from a series I 240Z. These are the vents that are inside the hatch and the drain tubes that attach to them. Nissan part numbers are as follows Assy-Duct Rear Ventilator Outor: 90820-E4100 Tube-Drain: 90828-E4101 New or used would be just fine. If you have a pair, or two, or can get them please provide pix (unless new) and price you want for them. I have attached a pic to help.

On your post look under your name, click the My Gallery link. Then on the page that loads on the right side of the screen just above the green area there is a link, Upload Photos, click it and follow along from there.

Does anyone know for sure if this will fit a 240Z?

Ahhhhaaaa!!!! I have been using http://www.hybridz.org to try and access their site. So what we have here is a DNS problem. As always, thank you 2many! EDIT I jsut tried the link above and that didn't work but the URL I listed does now.

I like the Velo Rosa kit, some day I hope to build one. But the car you have posted a link to is just plain FUGLY!! :sick: :sick: :sick:

I can't access it from home or work and I can assure you that I have no viruses at home nor work (IBM). I have not been able to access the site since Saturday when the message said the site was down, all I get is a 'can't find site' error message.

Did you know that there are a couple clubs in AR? I don't know if they are close to you or not but if you go to http://www.zcca.org/ and click the AR link at the very bottom it will show the info for the two AR clubs registered with ZCCA.

Is this the one that requires drilling the chasis to install or not? Does it include the end links, bushings, and all other mounting hardware and brackets?

I'm glad someone else asked I saw on Sat that the site was temoprarily down but yesterday and today I get a 404 error (Can Not Locate Server).

Take a look at my site for a few Scarab pix. I could try and contact the owner, he lives here in town and I think he's a member of the local Z club.

So it sounds like an L28 with a 10:1 CR would be ok with a stock starter. Right? The engine will be an F54 block, NO boring over, flat top pistons and a stock N42 head.

What good does this do? Wouldn't the zinc plating wear off the first time you drive the car? Is it worth having or not really?

Contact SCCA_Racer on this site, last time I was out at his house he had lots of 280Z suspension parts. I'd send him an email since I do not see him on the site very often.

Did anyone record the premier after the Superbowl? The game ran over and my TiVo only caught the first 15 minutes of it.

Unfortunately it looks as though they all drive 350Zs, only a couple pix even had a first gen in it. Nice to see so many women involved in Zs though!

Go back to that site and click on Performance Tips, then scroll down to the item labeled Sixth - The Differential. I think that this is what you are looking for.

I only have one front turn signal left and the entire taillight set including the trim is sold.

Many good parts still available! Someone asked for the hood support and now I can't seem to find their info, if it was you please contact me I have pulled the part and need your shipping info.

I've got a '73 parts car that I'm parting out. How much you spending on a radiator? PM or email me about it.