nix240z

I have 9 heater control knobs and every single one is cracked. Now I have reproduced the early style heater control knobs.

The Last 2 new sets with "Datsun" went for over $400+ each on ebay and that was a few months ago....

This is the best color match that I could get for the early 70's series 1 Redish/orange color brake booster check valve.

Reproduction 72-73 Am/FM radio face plate, I am also working on the clear part. Reproduction Radio knobs also done.

I had a similar problem when painting my car, the paint shop mixed part of the paint wrong and I painted it. Then I looked at the paint and I could not sleep that night. I have also had every single nut, bolt, washer, etc. replated on my car, if it came from the factory it has been replated. I ended up repainting my car because it would have driven me crazy. So if you have lost sleep then repaint because it will just drive you crazy, at this point in your build what is another $2 or $3k. Because i know how much I have in my build. On a side note if you need any new rubber parts check out my thread http://www.classiczcars.com/forums/garage-hobbyist/49264-240z-fuel-brake-line-insulator-sets-steering-rack-expansion-reservoir.html

Blue, that is just what I was looking for. thanks Steve

Can anyone help me out with a pic of a early 70 series one Rubber Hood adjuster? I understand it is different than the later Rubber Hood adjusters in that it is one solid rubber piece molded into the bolt vs slipped over the top of the bolt. Steve

Hit me up on a PM with what you have in mind. Steve

The problem with speedo cable grommet is that it would have to be cut to get over the ends. Nissan made two types and early and a later style. Steve

Look at this thread and let me know what you need and I can get you a price. http://www.classiczcars.com/forums/garage-hobbyist/49264-240z-fuel-brake-line-insulator-sets-steering-rack-expansion-reservoir.html Steve

L/R switch

Working on a Radio faceplate also. Steve

The knobs are cast urethane reproductions. steve

Will do, here is a test sample of the knobs.

I am working on the knobs, I already have the knobs done. I will be sending the first batch of twenty to be chromed in the near future. steve

The grommet is made to order plus all the other items I have reproduced. steve

reproduced the early 70-71 in original straight style.

early 70-71 choke cable grommet in the straight original version.

Pm sent. steve

Radio knobs, I am working on getting a price for the chrome knob plating.

Thanks for the input guys, both my 71's have black and my 72 has a black also. I can do them in Red also, so I will make up a batch of Red. Thanks again for input on these parts. Steve.

I am working on the antenna mast finisher nut plastic part. Plan on doing this in both a hard plastic and a shore 90A urethane type. This is a sample I machined for casting.

update: found an original 71 choke cable grommet. The nipples are straight and 10mm long, I will improve the design but it will still look just like the original once installed. It looks bad but this is what I was needing. thanks all for input and help. steve

Dan, I will mold up a few more sets of the clear defroster wire boots and let you know. I finished up the angled version of the early 70-71 choke grommet and I am waiting on the original before I do the other straight version. I have all the parts machined and ready to go.

A few pics of my restoration of my 71. This is what all the reproduction parts I am making is going on.