Ron Carter
Community Member
-
Joined
-
Last visited
Everything posted by Ron Carter
-
-
-
-
-
-
-
-
-
-
this is the top mount to the link of the sway bar. relocation of the factory regulator required or contact PDK racing to have tabs welded on to mount the regulator to this bar -
use the hood stop as a pick up point, the area directly behind the firewall has factory provided structual bracing. -
this photo shows the bottom mounting position of the brace (to the sway bar). The sway bar is mounted to this plate, modification to the factory mounting points for the sway bar is required. -
-
-
-
-
the test mule was installed and driven on a 71 240z for over 1 year, this car has tripple mikunis, and had plenty of clearance for the linkage and carbs. -
photo of Sammy finnishing installation....see my other photos for more details -
-
The ultimate front strut bar construction Fully modular A Triangulated designed structure that eliminates strut tower twisting. Unlike the other braces on the market this unit will stop all movement of the strut towers in all directions. This is the only brace on the market with a diagonal bar that bolts to the frame member. This strut assembly can be used in all race venues due to its modular construction. Made from Lightweight Tubular Mild Steel. For all types of driving, whether you are Street driving or Road racing. See my additional photos for installation information. Mark PDK Fabrication 760-724-0144 pdkracing@cox.net www.pdkfabrication.com -
-
Aftermarket Seats -
this is my 71 240z that is being stripped to move parts to my 72 240Z -
TWM fuel injection does direct port fuel injection systems for 240-280z's, they currently offer a cold air box for their fuel injectionsystem that would work for your application.
-
p-90 and the p-90a heads were on the 82-84 280zx's although i have never seen a p-90 i understand that they do exist and are a solid lifter version of the p-90a. As far as building a stroker turbo motor on a budget, well that will be tough unless you have your own machine shop and the knowhow...as far as how much boost it depends on what rod and piston combo you run, and i can't help you there. I suggest contacting Rebello Racing...or D.L. Potter. Good Luck...
