Zedyone_kenobi

Fantasy: I will work on my Z one day every week Reality: I will stain the back patio, build cabinets, wash dishes, change diapers, every day of every week. OH yeah, I may get to change the oil every now and then.. haha

Oh come on Kirk, you know you love those wheels, I am willing to bet you could sell them. they are not bad looking, and are practically new.

oooo that short nose is Niiiiiiiiice

Hey Arne, I have a 7/71, I can go check mine, here you go.

could not agree more... time on the road is what you need! Let that straight six sing!

I confirmed today, I have that brace!!! whoo hoo!

I will check my car to see if I have that tonight, if not, I will need to procure a donor. And it will make me wonder why I do not have that, if it was welded, I need to see if it was removed and how. Should be some fun detective work!!!

Well dont worry about offending me on getting the same exhaust... they sound amazing, and I love hearing my zed go up through the rpm band, and it decelerates awesome as well with a nice blurble...Sounds like a vintage 70's race car. I am running a resonator as well... so without it, I cannot imagine how loud it would be. But for now, its comfortable and I can have a conversation while driving, which is good enough!

Well that center support may be there, I have never seen a picture of it. Do you have a pic of it so I can go look. Honestly, I have not looked at much in front of the radiator support..Most of my work has been behind that...So it may be there or not, I would need to go see if I knew what to look for.

Yeah, I bruise easily..hee hee

Get a hold of your guy Wing!!! I am on the hunt for perfect condition front pieces!!!

Yup Arne, behind my front air dam, its open as the sky.. (i.e. no sheet metal at all back there...) Well at least not valance panels, have sheet metal where it is suppose to be..

Looks absolutely beautiful!!! Love that car!

correct, the other 7 were for my days playing with Camaros and trans ams. I will do the compression check sometime soon. TR260Z, we could have a compression check day.. PM me and we can make plans!

Got it so I would need that as well... this is looking more like a junk yard salvage job now.

Yeah, MSA is asking 138 per side and 171 for the center. I would actually pay that for perfect unmolested body panels. Question though. I can see how the sides would attach, and I can guess that the center just attaches between the two, but does it attach anywhere else. How can it be strong enough to hold on a 'spook' type air dam if its just attached to the sides!!!

THanks Arne! I was configuring a way to hold those things open, but it looks like just pulling bowls would be easier. As usual...great advice.

Hello all! I rarely post in the body work section as so far I have not had anything more serious than a dab of underbody rust that POR-15 took care of. So I have been thinking of removing my front air dam and going back to the stock front end with a Spook air dam (BRE style). I know there are many places to get one of these, but what I do not have is all the body work underneath my bumper like the side pieces and front center valence connecting them. They are just not there, as my air dam was installed when purchased new according to the paperwork and bill of sale. Here is my current config. Where can I find those front three pieces of bodywork if I decide to go this route? As MSA and Black Dragon do not sell them. Any bites? Junk yard maybe?

I have been meaning to check the compression of my 240. I have no reason to expect its anything but perfect, but I am an engineer, and I like to know. Lets see.. standard way to check compression on a small block chevy dictates you unscrew the spark plug, you screw in the compression check. Unplug the coil from the distributor, hold the throttle wide open and crank her about 4 over. Read said gage and repeat 7 more times. Now with the SU's, you cant really hold open the piston's, so how do you do a proper compression check?

When you say air horns, do you mean flaring out at the end?

Let me translate that into Zedyone world for you lucky fellahs. ME - "Honey, I want to buy a new light bulb for the Z" Beautiful wife - "My gosh, every week its something, you never stop spending money on that car!" ME - "But honey its only $4.58 and I sold platelets to get it" Beautiful wife - "You know you have a new baby, how much more is this Z going to cost us" ME - "I dont know, I am just making it perfect a little at a time" Beautiful wife - "Okay, but this is the last thing this year, we have house projects to complete" ME - "Its only January!" Beautiful wife - "You can buy something after we finish the back yard, the closet, and the outdoor kitchen" HAHAA.. welcome to my life. Its really not that bad, but she keeps me in check. If she did not, I would be dumping money by the truckloads into my Z. And most of the time its on stuff, I did not really need... She is good to curb my enthusiasm. Zedyone = Impulse Shopper!!!!!

If he has the flat top carbs I have an E46 manifold with two SU's on it that he can pick up. I will give him a recession price on them...All SU's must go!!!!

Its hard for me to recreate the clunk. I can drive it all day and not hear it. But then every once in a while I hear it again. I am going to do the diseazd suggestion soon.

That looks really good. I have never been a fan of the slots, but my gosh, they look the business on your car. Also, your making me think of putting my rear over bumper bar on...

When it arrives at your house, it will be all worth it buddy!