moritz55

1973 - ready for Spring! Cleaned and tuned.

1973 - ready for Spring! Cleaned and tuned.

1973 - ready for Spring! Cleaned and tuned.

1973 - ready for Spring! Cleaned and tuned.

1973 - ready for Spring! Cleaned and tuned.

This is a photo of my 1st 1971 240z (bottom) taken in 1978. Had it for 5 years from 1977 - 1982. The top photo is of my 1973 - 240z taken in 2008. Enjoy the Retro Flash-Back comparison!

This is a photo of my 1st 1971 240z (bottom) taken in 1978. Had it for 5 years from 1977 - 1982. The top photo is of my 1973 - 240z taken in 2008. Enjoy the Retro Flash-Back comparison!

This is a photo of my 1st 1971 240z (bottom) taken in 1978. Had it for 5 years from 1977 - 1982. The top photo is of my 1973 - 240z taken in 2008. Enjoy the Retro Flash-Back comparison!

You can also see the rear speakers installed and the wires which were run to the center console.

You can also see the rear speakers installed and the wires which were run to the center console.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. This photo shows the installation of the Transmission Tunnel bracket and side belt to the existing hole. I used the L bracket to allow the side belt to feed nicely into the lap of the seat for improved wear and less stress on the belt.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. This photo shows the installation of the Transmission Tunnel bracket and side belt to the existing hole. I used the L bracket to allow the side belt to feed nicely into the lap of the seat for improved wear and less stress on the belt.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. This photo has the carpet removed. You can see the bracket that attaches the retractable unit to the existing mounting hole. All mounting hardware is included with the MSA seat belt kits. In this picture is my old carpet (is just an underlayer) which has a hole in it to allow the bolt to attach to the frame. This gets covered when the actual carpet is re-installed, refer to photo #002.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. This photo has the carpet removed. You can see the bracket that attaches the retractable unit to the existing mounting hole. All mounting hardware is included with the MSA seat belt kits. In this picture is my old carpet (is just an underlayer) which has a hole in it to allow the bolt to attach to the frame. This gets covered when the actual carpet is re-installed, refer to photo #002.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. This photo shows the Y Bracket attached to the rool existing hole. Not the shoulder harness belt that clips to the wait buckle rides OVER the retactable belt that is fed into this Y Bracket. This assures smooth operation of the shoulder harness belt.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. This photo shows the Y Bracket attached to the rool existing hole. Not the shoulder harness belt that clips to the wait buckle rides OVER the retactable belt that is fed into this Y Bracket. This assures smooth operation of the shoulder harness belt.

1973-240z .. This installation of the New MSA - 240z Retro seat belts with shoulder harness. The photo shows the retractable harness & shoulder strap attached in existing mounting holes for the 1973-240z. I did slit the carpet under the retractable harness so I can remove them for cleaning. The slit is not visible.

1973-240z .. This installation of the New MSA - 240z Retro seat belts with shoulder harness. The photo shows the retractable harness & shoulder strap attached in existing mounting holes for the 1973-240z. I did slit the carpet under the retractable harness so I can remove them for cleaning. The slit is not visible.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. Also Installed are the MSA "Black" protective washable seat covers to assure my exceptional looking stock seats are preserved.

1973-240z.. This installation of the New MSA - 240z Retro seat belts with shoulder harness. Also Installed are the MSA "Black" protective washable seat covers to assure my exceptional looking stock seats are preserved.

1973 240z, with L24 engine, 5sp 1982 ZX Trans, 4wheel disc brakes, and stock interior with Dual CD/AM/FM/iPod/USB 200amp- quad speaker system.