Just received Ground control coil over kit for the 240Z.... No instrucitoins? Anyone have any idea as to what positon I should mount the threaded sleeve? If you do please provide reference points as well.

thanks

Quentin

Here's a copy of the instructions

Coilover Install

Hmm, I couldn't find my copy... glad someone had them handy, although, it is kinda hard to read....

You'll also find some tips in the Tech articles section

http://www.classiczcars.com/forums/showthread.php?s=&threadid=1200

excellent! as always the forums are full of great assitance:D

Which shocks are you using? Just curious as my time is coming to do this as well.

Tyson

I am using Tokico Prodra G - not available any more - almost a racing shocks from Japan. Large shafts etc.. :classic: still have a couple of sets of these kicking around NIB if anyone interested...

Q

Not sure how similar the install will be, but on my Talon the perch is about an inch from the bottom of the sleeve, which yields about a 2" lower stance. It has very stiff spring rates though, so it may be a little different.