Fit looks great. Ideally it would be an offset inlet/outlet. I can cheat the downpipe over a tad and have plenty of room on the RH side 

Chase,

Great solution.  Please provide a link to muffler supplier.

Thanks,

Keith

33 minutes ago, zed2 said:

Chase,

Great solution.  Please provide a link to muffler supplier.

Thanks,

Keith

Keith! Hope all is well on your side. 

 

Link to the muffler: 

https://www.performanceexhaust.com.au/p/5-X-3-OVAL-12-LONG-1-3-4-C-C-GLASS-PACKED/A318GP

For some reason the website checkout will not allow for a US based address. Shoot them an email and they'll send a Paypal invoice over directly. Took only a few business days to get to my door step. 

 

Now if I can get the section of pipe between this and the rear muffler bent up I'll have a complete setup.  

Chase, thanks for the link...I had this one on my radar:

https://apexhaust.com.au/5-x-3-x-12-inches-long-cc-1-75-inches

Keith

6 minutes ago, zed2 said:

Chase, thanks for the link...I had this one on my radar:

https://apexhaust.com.au/5-x-3-x-12-inches-long-cc-1-75-inches

Keith

I came across three different shops (including the one you sent the link from) in Australia selling a 3" x 5" x 12" oval canister muffler. I would bet that they are all selling the same one, under different names.  

 

The one I received had no part numbers stamped on it, and actually came in a Mangaflow box (PN on box was for a completely different muffler). Curious where these are being supplied from.