Blower Motor Assembly with Cage (1983 280zx)

[Steve G.]

I am looking for a Blower Motor assembly with the squirrel cage. (even just the squirrel cage would work) 

Following are photos of the need parts.  

I really appreciate anyone's help on this. 

[Terrapin Z]

I have an 82 ZX I am parting, I'll check and see if that is any good. 

[Steve G.]

2 minutes ago, Terrapin Z said:

I have an 82 ZX I am parting, I'll check and see if that is any good. 

Thank you so much for such a quick response. I'll wait to hear from you and I appreciate you taking time to help!

[Terrapin Z]

I have that pulled out and tested, it does work. The shell has a little rust on it. The car was under a tarp for many years. 

I'll PM some pictures. 

[Steve G.]

That is really good news. I'll wait for the pictures. Thanks.

[Steve G.]

Dave:

We installed the blower motor and cage successfully. I appreciate your help.

The other part you sent was not the part I was looking for.  I will return the part to you in case someone else needs it.

What is your mailing address?

 

Steve

[Mike]

3 hours ago, Steve G. said:

Dave:

We installed the blower motor and cage successfully. I appreciate your help.

The other part you sent was not the part I was looking for.  I will return the part to you in case someone else needs it.

What is your mailing address?

 

Steve

Hi guys, I recommend exchanging this information over private messaging.  

Mike

[Steve G.]

acknowledged.

 

sg

[Terrapin Z]

12 hours ago, Steve G. said:

Dave:

We installed the blower motor and cage successfully. I appreciate your help.

The other part you sent was not the part I was looking for.  I will return the part to you in case someone else needs it.

What is your mailing address?

First off I am glad to hear the blower and cage worked out for you. Second I am not sure what you were after if not the amplifier, No worries though.

My return address should have been on the shipping label. I'll PM it to you though.

 

 

9 hours ago, Mike said:

Hi guys, I recommend exchanging this information over private messaging.  

Mike

Thanks for the advice @Mike I would not have posted my address on here, PM only.