Jump to content

Recommended Posts

Trying to do some research during my tear down.  Have gotten a lot of info here, but have a few questions;  I have a 73 Z with auto trans but will be changing to manual on the rebuild.  I have a spare engine and trans from a 72 Z. I'll be using that trans.  I need to clarify some of the wiring.  On the auto there are two wires on the left side of the trans (black wires). From what I can tell these are for the kick down solenoid and will not be needed on the manual trans.  On the right side of the auto are the four wires , 2 for the inhibitor switch and 2 for the back up lights.  I know the inhibitor wires need to be connected together so the car will start with the manual trans.  The other two wires are for the back up lights.  On the manual trans I only see one switch on the left side of the trans with 2 black wires.  What is the switch for?  As I see it, I need a neutral safety switch and switch to connect the back up lights.  Am I missing something or do I have to add another switch? Thanks in advance for your help.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.