good to see it on the road again

And onto the mod front;

Sourced some R31 Import Struts (100mm brake spacing), so figuring out what to do with those. Probably cut them into coilovers and put on the biggest best brakes I can squeeze under 14 inch wheels. Also work on fitting wheels.

Might be getting a l20et, seeing how it turns out this week. Should be interesting swap. Old school is best school.

Gotta start sourcing bushes and a rear sway bar kit (I know a guy who can get one, might have to group buy 5 to 10 if anyone else is keen PM me). Find or make front strut brace.

Not sure whether to cut my spare wheel well out, it's quite rusty and with all these "hoon" laws I don't want my car taken over something silly. Thoughts?

Ps - I know it's a long shot, but I'm chasing a 3TM VL Turbo Manual ECU, if anyone knows of any for sale, let me know.

Go Nistune rather than find and pay huge $$$ for a VL Turbo ECU

Go Nistune rather than find and pay huge $$$ for a VL Turbo ECU

Would, but I need the base 3tm Ecu first. Only got a 3ta (Auto ecu).

I know R31's and i know that Auto ECU's will work on Manual cars.

but it wont work the otherway around

if you get what i mean./

Completely forgot about these!

Also, a old thread I posted..

http://www.classiczcars.com/forums/240k-swap-sell/48529-fs-dash-bits.html