I have these bwa wheels and going to post in classifieds.. my question is how do i measure width of wheel? i measured from outside to outside and came up with 7in. is this correct way?

If i am not mistaken most wheels will have the size stamped on the inside. All that i have owned are that way.

I looked at the picture u posted and the size is on the os of top right support

6JJx14 :classic:

Edited December 25, 201015 yr by kjphilippona

thanks..so they are 6 inch?

thanks..so they are 6 inch?

Yes, they are 6" width. You measure the width from inner bead to inner bead with the tires off the rim https://www.rsracing.com/tech-wheel.html. Those also look like they are stamped 13" (diameter), not 14".

-Mike

Mike, they are 14". It may not be clear at the rim but look at the tire.

Mike, they are 14". It may not be clear at the rim but look at the tire.

Yep, you are right, they are 14". I didn't think to look at the tire. Now that I look at the rim on my desktop computer I can make out the 14 now. Sorry about that.

-Mike

yes they are 14..thanks for the help.so i will post them 14x6..