Hey guys, I searched the forums but couldn't find any thing about it but my tach needle gets stuck at 4,000 RPM's. The only way to get it back down is by tapping tachometer face until it goes down, not my favorite thing to do while driving. Anyone else have this problem and can it be fixed without removing the dash?

Thanks

Graham

I haven't tried tapping on my tach face. Mine just gets stuck on 3500, then it just starts working again, until it gets back to 3500. I have just been dealing with it and not letting it get me down.

You don't have to take out the dash to remove the tach. There should be two screws holding it in on the back. Well that, the wiring harness and the light bulbs. Remove the tiny screws (damn japanese and their small hands) and the connections and you should be able to push the tach forward.

Some models also have a screw just before the bezel inside. I believe it is at 12:00.

Anyone know how to fix this or what it may be?

If you are going to Canby we can talk about it next week end.

Sorry a7dz, most likely wont, I'm only in highschool and the end of the year finals are coming next week and not to mention work. But there is always a chance, maybe....

Nissan Sucks Chevy Rules

go away fixxor.

Graham, I have the same problem with my Z. it only happens when it's really hot out, so I have a feeling the heat is what causes it to stick. in my case It sticks where ever it feels like. I'm not sure what the internals look like, but I wonder if the heat causes something to swell, or causes something inside to become gummed up

Nissan Sucks Chevy Rules

Why are you here then? Don't hate on Nissans just because you can't fix yours.

Sorry guys was logged in at work, saw my great coworker doing the deed but was too late. Please any mod delete that post and I apologize. Wont happen again.