mmagnus

I am selling a white guage overlay set specific to a 1970 Z. Note Speedo starts at 20 and Amp Guage is higher. You can find on Ebay at: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1826566523&r=0&t=0&showTutorial=0&ed=1020898136&indexURL=0&rd=1 If it doesnt sell there, I will offer outside for $25 Mark

I am about to replace carbs on my 70 to tripple Delorto carbs. I was wondering if anyone has a "laundry list" of fuel line, hoses, adapters, etc. I might need for this conversion. I currently have the carbs, cannon intake with linkage. I was looking at Earls for lines. Mark

I am trying to replace shifter know for my 240. does anyone know the diameter and thread depth for my z. Mark

I just purchased a NISMO performance clutch. 225mm clutch cover.I also have a Fidenza light flywheel. Does anyone know weather there will be some compatiblity issues with these two items. I am installing on 240z with 5speed. Mark

Royce, Thanks for the info. I will definately try to attend the swap meet. can you give the address or location in Rio Vista. What times its being held. Mark

I am looking to convert my 70 Z to a R200 rear end. It currently has a 5 speed tran. (not sure what year) and I need a parts list for the conversion. Can anyone tell me what is required to make the swap besides the rear end itself. Mark

What condition are the headers and for what years?

I have a triple set of Dellorto 40 sidedraft carbs. I want to buy a canon intake that has bolt pattern for Weber. Does anyone know weather they have the same pattern. From what I have read Dellortos and Webbers are almost identical. Has anyone used the Dellorto setup on canon intake? Is the linkage the same?? Mark

I found a link for a company that sells this set up for $295 including linkage. For those of you interested here it is: http://www.jameng.com/products/index.phtml?section=6

I checked Yellowpages.com and Switchboard.com. Neither show a listing for that name. If anyone has a numbe or website for this person I would appreciate it.

IT WORKED! The new wheel is on. Thanks! Took about 5 minutes and some good "elbow grease"

Do you reccomend WD-40 for this method

Ok, I just bought this beautiful Nardi steering wheel but cant seem to get the stock wheel off of my 240z. I went and bought a wheel puller but the diameter of whole on the puller is too small to fit on the bolt on the car. I looked at one other puller and it is the same size. Can anyone tell me where to buy a wheel puller that will work on my Z. I am dying to install this Nardi!!

I am getting ready to install tripple webbers on my Z but I can seem to find a intake manifold. I know Canon makes one, but where can you buy them? website? Also, is there a difference in the manifold from one year to the next.....HELP!! MARK

from what I am reading there is a difference in the pan from one year to the next. I am not sure why the gasket works on all. Maybe because the blocks are all the same.

I am getting ready to purchase a remanufactured L28 from ATK engines. Evidently it doesnt come with an oil pan. Does anyone know someone that sells new oil pan for this block? I really dont want to get from juck yard because I am trying to make the care show quality. Mark

THANKS FOR YOUR HELP. IT LOOKS LIKE THEY WOULD FIT BUT I DONT WANT TO TAKE A CHANCE. I THOUGHT I WAS GETTING A GOOD DEAL ON THIS FOR $56. TURNS OUT I CANT USE IT. ANYONE NEED A GOOD RAYBESTOS REMAN. M/C FOR 72 OR LATER. I WILL LET IT GO FOR WHAT I PAID. MARK

I just picked up a brake master cylinder that looks like its made for a '72. The only difference I can tell is the location of the resevoir bottles. The seem to be opposite from each other. Does anyone know weather or not I can use this on my '70z. Mark

I have decided to go with a V8 conversion on my 70 Z. I am probably going to buy a crate chevy 350. I will probably not do the conversion myself because I want it done right. From what I understand there is a conversion kit that I can purchase from Motorsport. Does anyone have any feedback on that kit. I am also looking for someone that knows what they are doing, to do the conversion. I live in the San Francisco Bay area. Mark

I have a 70 240z that has riveted body side molding that I want to remove. Any idea of how to remove this without damaging the body in the process. Thanks Mark