CB Garrett

👍

Thank you Captain. So I didn't keep track of what side those springs came off of when I disassembled. My thinking is the longer of the two less than 5/8 of an inch I'll use 4 the passenger side rationalizing that the tilt of the engine in that direction may need more support. Comments?

I've seen the free length dimensions in the manual I have but when I'm measuring them on my workbench I'm getting 14 1/2 and 15 and 1/8 total length. So should I not be worried about the half inch variation. Their stock springs and they're 54 years old. A new set of Elbach Springs or $279. set of 4.

I'm in the process of rebuilding the front suspension on a 1971 240Z. I've noticed the coil spring lengths are not the same they're off by 1/2 to 5/8 of an inch regardless of where I measure one of is shorter. Do I need to be concerned about this point? If this is an issue what should I purchase? Thanks In advance.

Quite true, thanks.

Success. 54 years old everything is a struggle during tear down.

Do the left and right tie rods have different threads? I've loosened the passenger side nut but not the drivers side. 240Z 1971 Help