Carl Beck

Hi Webmanic70 Great pictures and your Datsun 240Z is in amazing condition. Tell us more about how you came to own it etc. Item # 83 Mud Guard 63835-E4100 Item #82 Sealing - Mud Guard 63815-E4100 Item #82 is a dense foam rubber weather strip - usually the originals have all but dissolved, and turn into a gritty goo. The seat belts turn silver with age. The dye evaporates and/or fades over decades, this happens to the surge binding on the carpet - only the threads turn brown in most cases. What is the original engine serial number FWIW, Carl B.

I don't know about that site - but the Parts Catalog shows 11061-N3600 as superceding all previous numbers - and being for the L24/L26. At least in terms of form, fit and function - any L24 thermostate housing will work. Courtesyparts.com lists the part at $31.69... FWIW, Carl B.

I haven't noticed any significant difference 70 though 73. The "box" is one thing - do you have a good heater core? Pretty difficult to find new core replacements. Some places list them - but when you order they really don't have them - or they have parts that are "supposed" to fit but don't. Heater cores might be the next thing that have to be reproduced.. Good luck, Carl

Every place I contacted for used 1/4's last year wanted $800.00 plus shipping for clean originals with no body work. It does take a bit of work to remove them and get them ready to ship. Since you are in Mich. it might be worth the effort. I don't know what you mean by - they are in good shape after extensive body work was done - - - if they are full of bondo, or metal patches - and now they look like they are in good shape - - that's one thing. If they are mostly rust free and in original shape with good metal that's another. So their value may vary with condition. Gave up on finding good used panels - and went with NOS replacement on the last car I restored last year. FWIW, Carl B.

Someone local or close to him - most likely showed up with CASH in hand. Which forced him to decide to grab the cash or take a chance on Ebay tire kickers and non-payers. Must have been what the buyer expected it to be... FWIW, Carl B.

Very interesting... thanks guys..

According to Hemmings: This Day in Automotive History 6/26/1958:* First Datsuns (Nissan) exported to U.S.

The last set I sold - were taken off a 72 240Z when it was new - matter of fact they were never installed on the car, as the Dealer had already put mags on it pre-sale. They were carefull stored and looked Perfect. I sold that set of 4 for $500.00. People who are doing a full restoration - will pay $125.00 each for a set of four - but they have to be SHOW READY. The one's pictured would need to be completely refinished and might bring something closer to $35.00 to $45.00 each. FWIW, Carl B.

Hi Fico: Easy for us to understanding anyone wanting a 240Z. They are beautifully styled and engineered - by any standard. That is an interesting exhaust system on your G - I wonder how different it would sound with and without the dead end mufflers or resonators. Hard to picture exactly what effect they would have on exhaust gas flow. Know of any technical data or third party testing that was done? You'll hear it often - buy the cleanest body you can find - pay the extra money up front - it will be the least expensive in the long run. Good luck, Carl B.

Very important to have the correct timing curve dialed into any distributor for your car. The timing curves in many of the later cars are set at the factory to meet emissions standards/tests and won't deliver the preformance desired in other applications. I haven't been able to find a shop around here {Clearwater, FL} that still has a working Sun Distributor Machine, on which timing curves can be measured/checked/adjusted etc. FWIW, Carl B.

GOOD TIP - When the Gland Nut is tightened down properly on the shock - you should have about 1/8" gap between the gland nut and the strut tube. Some manufacturers send new Gland Nuts with the shocks - that are thicker/thinner depending on the total lenght of the shock tube - but many times people use the old gland nuts not realizing that there is a difference. Some manufacturers send a washer..but are not clear in their instructions about the washers use or purpose.. So some people leave them out... If you run out of threads, or if the gland nut screws down to the top of the strut tube -something is not right... FWIW, Carl B.

Brake fluid is not very expensive {its not cheap either} - I would change the Master first, as you don't want junk from the old master pumped though the hard lines. Secondly you want a Master that can put the proper pressure on the lines to properly bleed them. Then I flush clean brake fluid through the system until all four corners are flowing clean fluid. I catch it in a clean clear plastic cup for inspection. After that - I'd inspect and/or rebuild the rear wheel cylinders {unless they have been replaced within the last couple years}. Replace the rear rubber brake lines - Then do the front brakes. I use this bleed order - Drivers Rear, Passenger Rear, Passenger Front, Drivers Front. FWIW, Carl B.

The fact that the seller didn't jump on them - leads me to beileve that they were Shill Bids from associates, and they knew they would be rejected. E-Bay is loaded with SCAM artists now... FWIW, Carl B.

The problem with that car is - it wasn't or hasn't actually been "Restored" ie... put back to it original "as new" condition. No pictures of the full undercarriage that show exactly what was done there either - and that hurts it. At this point it is really a very nice "Street Mod." - but not a Collector Quality Classic Car. A Collector would still have to spend many thousands of dollars to finish a restoration. The trouble is most Collectors won't buy a project. Buyers of this car are Enthusiasts... but that group won't pay anywhere near to asking price... maybe 1/2 that. FWIW, Carl B.

... I should have looked. My body work estimate is based on the lastest 240Z resored. I took the body shop a bare shell. That one took new floorboards, an NOS Right Rear Quarter, replacement innerfender wells on both rears, replacement dog leg on the left. The car was on a rotisserie and the undercarrage was striped to bare metal and completely refinished, sealed etc. All paint/supplies were PPG. At first I thought the estimate was a bit high on that last project .. but after all the metal work was done - I felt it was a very fair price. About 1700.00 of that $14K was for the body parts replaced. About $6K was labor for the metal work and the other $6K was for a very high quality paint job. When the metal work was done - you could not tell the car was ever touched.. Of course prices vary depending on the overhead of the location in which the shop operates. I tried to keep a very accurate track of the actual time spent on the last car - I don't work too fast but I'm fairly efficient at most tasks.. so I feel that the 650 hour figure is pretty close. FWIW, Carl B.

That will be a much better arrangement - with the sensor ahead of the thermostate - you would read water temp in the block/head... So you would get a warning if/when the thermostate sticks shut and block temps' start to go too high. With the sensor past the thermostate - you would get a false reading, or at best a very delayed reading on block / cylinder head temps. The one thing you don't want to do is overheat the L series engines. FWIW, Carl B.

I'd estimate - around $14K for metal work, replacement parts, body work and Paint & Supplies. Then perhaps another $15K redoing everything else. On top of that about 650 hours of your weekend labor. When finished, you would have a high quality restoration - ready for the next 50 years. As long as you get inside all body panels and stop all rust.. $30K isn't too much to have a finished car - especially one that has been in the family since new. Looks like it was originally White with Red interior.. Can you do it for less ? Yes - but no sense doing it if you don't go 100%.. HOWEVER - the only real reason to do it - is because you enjoy the process. You enjoy the time spent in the garage, you enjoy the personal satisfaction of getting each part, component, assembly finished and looking like new again. Getting done can not be the goal - enjoying the process is the objective. Otherwise don't start... FWIW, Carl B.

Hummmm Sounds like you may have lost more than your Bolts... 22nd wedding anniversaries are great - I've had two of them... FWIW, Carl B.

Call your local Nissan Dealer Parts Dept. and ask them to do a Dealer Search for 11060-U2001 Water Outlet. Get this one on E-Bay Item number: 370612906203 http://www.ebay.com/itm/Datsun-240z-260z-Water-Outlet-Thermostat-Housing-NOS-/370612906203?pt=Motors_Car_Truck_Parts_Accessories&hash=item564a4028db&vxp=mtr Put the one you have on E-Bay like this joker Item number: 360432206257 http://www.ebay.com/itm/69-70-71-72-73-74-DATSUN-240Z-WATER-OUTLET-NEW-MADE-IN-USA-/360432206257?pt=Vintage_Car_Truck_Parts_Accessories&hash=item53eb6f01b1&vxp=mtr Or - just go buy a plug and plug the hole you don't need. IF YOU HAVE A TEMP SENSOR in the bottom half of that assembly - below the thermostate. FWIW, Carl B.

Hi Jonu: That is interesting. I just checked all my 240Z's.. and none of them have a temp. sensor in the Gooseneck {or top of the thermostat housing}. I checked the Parts Catalog - and it says that the L24 & L26 use the same part - ie a Gooseneck with no sensor in it. In both cases the temp. sensor is located below the thermostat in the bottom half of that housing/assembly. Looking at the L28E's in my 78 280Z factory service manual - it also shows the temp. sensor in the bottom of the housing... Looking at my 83 280ZX service manual - that does show a "water outlet" in the gooseneck.. If you have a temp. sensor in the bottom half of that housing - under the thermostat - then to use that gooseneck you'll just have to plug that extra hole. If you don't have a temp. sensor in the bottom half of that housing/assembly - then I'd try to get the right parts to put back on the engine. What part number did you use when you ordered that new gooseneck? FWIW, Carl B.

Can you post a Picture of the "new" and "old" outlet housings?

nissanparts.cc lists them as "available - usually ships in two to four weeks" Courtesy says NLA from Nissan -but they may be in a Dealer Inventory somewhere. I've found a lot of parts by having the Dealer Inventory searched.. Might Give Courtesy Parts a call.. and ask them to search Dealer Inventory 11345-N3000 FWIW, Carl B.

I agree. Here is one - fly to Gainesville, Florida and drive it home. Makes a nice weekend trip. 1975 280Z five speed. Don Ahrens writes: " the mechanical things done on the 75 280z . 42k . original threw out. perfect floors, no rust, orignal paint, perfect bumpers including rubber. I just replace fuel pump with a nissan pump, no longer avalible, upper and lower rad., heater, bypass hoses and clamps all nissan. asking 5500. as is. We have pictures posted to Ahrens Auto Face page" Don tells me that the paint is bad.. http://www.facebook.com/permalink.php?story_fbid=10151015878922774&id=665002773#!/AhrensAutoService Drive it the way it is - get it repainted later. 42K miles and unmolested.. FWIW, Carl B.

Oops.. never mind.. Carl B.

I think it is more likely that the Staff member helping at the Ault Park Concours simply made a mistake printing up the sign. Or the owner simply put 2400cc on the entry app. by mistake. Wonder if Bob got any pictures of the engine from the other side.. FWIW, Carl B.