Patcon

I'll build you an engine... 😉

Jfa.series1 can probably help with that too

So many guys in that thread, not around anymore...

2 hours! That's like right next door. Now mind you, my wife's from Texas...;)

I'm in SC always like to find Z owners close by...

So I have been cleaning up more hardware Looks like this after the bead blasting Goes into the vibratory polisher with SS media and a little paint thinner Comes out like this After a quick rinse with brake cleaner there is a difference in sheen after polishing, although it is a darker color

North Carolina plates? in Tennesee?

Liquids seal is better 3m urethane or 3m weatherstrip adhesive Some of this is obsessive. I doubt your car will ever see enough rain to be an issue. Even parked outside all of these cars are 50 years old and rust at the emblems is not the issue. No offense intended...

If I was worried about water entry at the emblems I would use some emblem adhesive or urethane sealant

What would pulling the head accomplish?

It probably wouldn't be broken. Could have a little nick or slight cut. That's all it would take...

I recently ordered a lightened flywheel from them. it came in no problem. I have never tried to contact them. Supply is going to get worse as China just closed one of their major ports due to Covid

Yes, they are brazed

Beware of California Datsun, he has a poor reputation I can't answer the 240z / 280z spring question. I would suspect they're different because of curb weight changes

The car must be putting down some power to get the wheel lift like that...

I bought a whole set of of wheel lock removers. One of the big box stores might have a set

Love the airborne pic!

Look to be missing the seals I think this is the only source for accurate reproductions https://www.240zrubberparts.com/apps/webstore/products/show/5696404

@inline6 Did I miss the Google link somewhere?

Would you like to post your spreadsheet?

Great pictures!

I would not use CA, it could haze the lens

Yup about $55k

I think having a document that shows and describes each fastener would be superb! Perfect candidate for a tech article

I am thinking the choke cables tip the throttles slightly before pulling on the nozzles, iirc. That is why I leave the extra length