lm71z's Content - Page 2 - Classic Z Car Club Skip to content

lm71z

Community Member
  • Joined

  • Last visited

Everything posted by lm71z

  1. The speedometer O-ring kit was replaced on our 240z not too long ago, and now it's leaking transmission fluid from that same area again. Any idea why it's leaking again so fast? It's only been about 5 months since the new o-ring kit was installed.
  2. Does anyone have any extra ones of these? They're the springs that attach from the heat shield to the linkage of each carburetor.
  3. I originally posted a more detailed account of an unfortunate experience I had with a southern california "z car specialist" who claims to be an expert with z car restorations. I've decided to take the details out and just say that this person is a con artist who swaps parts from other z's and charges money for "new" parts that turn out to be used, without notifying the customer at all. To avoid controversy, I won't mention this person's name; I'm just letting everyone know that they should check with the bureau of automotive repair before they have any work done on their z. I would hate for this to happen to anyone else.
  4. I'll have to do that tomorrow. What exactly should i be looking for? The coolant leaks out of the bottom edge of the freeze plug, so i suppose their could be an imperfection in the block, but before the engine was rebuilt none of the freeze plugs ever leaked. If there is an imperfection in the freeze plug hole, then I would just have to use better sealant when installing another freeze plug, correct?
  5. The front freeze plug on the passenger side of the engine on my 240z has been leaking and we can't figure out why. 2 days ago we replaced it with a new brass one and used gasket sealer all around it. Today there is another drip of coolant that came out of it. Anyone know why the freeze plug would develop a drip leak? It doesn't seem possible that the plug could be leaking again considering that we put a good amount of gasket sealer around the edges of the new plug when we installed it.
  6. The oil pressure sender on my 240z has already gone bad, so I'm replacing it soon, but I'm afraid it might break off inside the block when I attempt to loosen it. What's the best way to remove it? Should I do it when the block is hot or cold? And is there any type of sealant I should use when installing the new one?
  7. Today I noticed one of the two bolts that mounts the distributor to the front engine cover on my 240z was loose, so I tightened it. The bolt seemed to turn freely, but suddenly just snapped off flush with the front engine cover when I tightened it. I didn't even snug it and somehow it broke off. Now I have to find a way to remove the broken off piece from the engine cover. What's the best way to go about doing this? I realize that I will have to take the distributor off, but will that screw with the timing?
  8. Does anyone know how to get a hold of a genuine Nissan 160 degree thermostat? It seems that Nissan only carries the 170 and 180 degree ones these days. The only one I see on ebay is $55
  9. There are about 200 miles on the rebuilt engine. We've pretty much ruled out the main cause being the sensor, thermostat, missing fan shroud etc.. Within 1 mile of driving the temp goes up to 3/4 and the radiator is burning hot to the touch. And this is only in 75 degree weather. We're beginning to think it's something more serious (internal problem). Any idea of what a more serious cause could be? To avoid a big controversy on here, I'll avoid mentioning the person who worked on our car, but it seems that we received poor quality work for the amount money we payed to have the engine rebuilt.
  10. Can anyone help me find a decent fan shroud for my 240z? I ordered the one from motorsport and it's junk for $80. It's cracked in several places and looks very cheap. If anyone can help me find a good plastic or metal fan shroud, I'd greatly appreciate it.
  11. I think I'll try changing that temp sending unit first. Right now we have the unit from motorsport. Does anyone have the part number for the Nissan one? I can't seem to find it in the FAST diagrams.
  12. We took the car for a drive today and the temp crept up almost to the P when idling. I don't understand how the car is getting that hot considering it has a brand new fan clutch, thermostat, and radiator. Any idea why the temp would have always been slightly under half before the engine was rebuilt (had an old radiator and a blown head gasket) ?
  13. I've heard that can fix it. Does it matter if it's a metal or plastic shroud? Is MSA's fiberglass one any good?
  14. Our 240z's engine was just rebuilt and all the parts in the engine compartment were replaced with new ones. Before the engine was rebuilt, the temperature would almost always stay under half, even though it had a slightly blown head gasket and the original radiator. Now, for some reason, the temp is always over half way. We're confused about what the problem could be, because a new CSF radiator was installed along with a new Nissan fan clutch and a new Nissan 160 degree thermostat. Maybe the temperature sending unit could be inaccurate? If anyone has any ideas, please feel free to pitch in.
  15. Anyone know what it is? Can't find it in the FAST diagrams for some reason.
  16. Does anyone have the part number for the Nissan fan clutch that will work with the plastic fan on my 240z? I can't seem to find it in the Nissan FAST system.
  17. I'm having my 1971 240z's engine rebuilt and I noticed that the person working on the car replaced my 4-screw carbs with 3-screw ones. Are the 3-screw carbs better? Should I tell him to put the 4-screw carbs back on?
  18. Thanks for those pictures. The one thing in my engine compartment that I'm not sure is original is the coil and resistor bracket. The resistor is in a bracket that clips onto the top of the coil. Was that design stock on a late 70?
  19. It's a late '70, production date of 12/70.
  20. ^what the title says. I'm having my 1970 240z's engine rebuilt and everything in the engine compartment completely restored to factory. If anyone has a pictures of restored or perfectly original 1970 240z engine compartments, I'd appreciate it if someone could post some.
  21. Does anyone know if this little vinyl boot is still available? It's the one that conceals the wires coming out for the console and going up into the dashboard. Mine has overspray on it and it would be nice to have a new one.
  22. Well what version of Windows are you running? I've installed it on Vista and on XP and it does the same thing on both. Maybe I have a bad version of FAST? Where did you download the program from?
  23. For those of you who have installed the Nissan FAST System on your computer, have you noticed that it uses 100% percent CPU? Does anyone know if there's a way to make the program not use so much system resources?
  24. What's the difference between them? Is the '72 head a lot better? I'm asking this because I have a 70/71 240z and a '72 cylinder head sitting in my garage. I might have the engine rebuilt and I'm wondering if I should put on the '72 head.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.