WingZr0

15 shipping included. i'm guessing... But the guy is on EBay so I'll be fair and say buy direct from him cause he has the ribbon AND stickers for $20! The diameter you need is for a 2 inch pipe. He describes these as original ANSA FACTORY RIBBONS so they should be concors correct. Ordering my first set today from him to see and make sure. But yeah if you buy direct from him you'll come out cheaper bro

I''VE FOUND SOMEONE WHO FINALLY SUPPLLIES THE ANSA RED TAPE RIBBON!!! FINALLY!!!!!!!!!!!!!!!!!! =) :classic: Now I can finish the 4 builds for my currant customers PROPERLY!! ! I'm so stoked seriously guys. The missing piece to the puzzle has finally been found after all these years.

Took her to Stephens Automotive. The Spark wires were installed on the cap wrong he knew something was off but couldn't find what at first. Every thing was right and every test came back ok. Then he saw the plug wires were installed 180 degress off! They were in the right firing order just on the opposite side of the rotor cap. Once he put them in the place "She purred like kitten!" he said =) So next up is brakes fore I take her in for smog check.

WoW. It's been a looooong time since I've read this thread or even posted on it. Well long story short the injector leaking issue was fixed, just a simple replacement of the injector was all that was needed. In recent news.... She didn't pass smog, turns out the spark plug wires on the cap were on wrong installed 180 degress off. In other words right firing order but on the opposite side of the cap. Took her to Stephenes Automotive, he had a look at her, fired her up and knew something was wrong but said everything looked right. Saw the wires were on wrong then put them in the right spot on the cap and "She purred like kitten!" he said =) So now back to get her smoged soon but first I have to take her at out the tranny shop. I had the tranny rebuilt and clutch slave which was leeking replaced. Then from there back to Stephens to have my brakes replaced. On deck is MSA 4 pistion crossed and slotted front disc brake set, stainless steel brake lines on all four, new drums in back with all new hardware and performance shoes. Also having my low gas light which doesn't work fixed (may be my light bulb's out). Once thats done back on the road with my brand new car!!! Well mostly wise =) All thats left is paint, little bit of interrior, suspension and bushings. Done ~Z~

Last one's up for grabs on Fleebay. Lowerd the reserve on the last one

I know right Gotta show em wat they're missin

Sold one, only have materials left for 2 more. Relisted on fleebay. ~Z~

Hello Gang. Also selling the ANSA Factory Race Sponsor Decal Stickers as well at the link in the above post. Have a look if you like. Looks I'll be moving to L.A. in a couple weeks afterwards ~Z~

[ATTACH=CONFIG]52517[/ATTACH] Got a call from a very good guy the other day who told me this wheel is actually made by Apliance Wheels. Still need the name of the wheel and the sizes it came in well as a catologe photo if possible. Thyanx for any help. The search is narrowing down! =)

Making another batch of 5 this time. Put em up on fleebay if anyone wants to get on a pre order. They will be custom made to order and be completed in under a months time. As usual I don't know when I'll be home again to make some more but I just got home today This weekend I finish painting one I already built for a friend in Conecticut who's been patiently waiting for me to get home . Anyway I will only have enough materials to do 5 this time so have at it you like at the link below. Thyanx again everyone ~Z~ http://www.ebay.com/sch/iheartracing/m.html?item=270980621013&viewitem=&sspagename=STRK%3AMESELX%3AIT&vxp=mtr&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562

Tempting cause I need 3 more sets of those for different colors in Powder coat. But still I must be patient . Now setting a $250 finders fee for that rim!! Dang it Tax time is coming up and I WANT TO BUY THAT RIM!!!!!

Mines is leather. green 4spd.

, Deal

American Racing smh. They don't have the molds, they don't have any of the old catalogs. Arne's right, they don't care smh They, a couple of workers, couldn't even recommend me to someone who may have they're rims that old. Not even a car guy tip to someone who collects or stashes old rims. Back to the old Barn find approach.

Our once Humble lil group is nwo 500 Members Solid!!! Still need to get my Z fixed tho ! Brakes and that's it. Oh and get her registered . May 15th i'm on my to get my Baby!! =) Bye Bye Indiana State, Hello California again!

Link doesn't work. Is Jim Cook Racing still around or anybody who sells the Super Charger?

Still no luck at the Whore House.

Thyanx, Registered, we'll see how it goes

OK, I'm placing a $1,000 REWARD on this rim NOT this rim but THIS RIM RIGHT HERE See the difference? I need the one with the Slant lip or Deep Dish Lip. What kind of lip is this called btw? The rim for as a heard is an American Racing wheel model called GT MAG according to an old brochure that was read to me. I really would like to have this rim please and can't find it anywhere but on the car Fun_In_My_Z sold Anyone with any leads please call me Day or Night at 530-701-1244 Thyanx ~Z~

Still looking . I'm trying NOT to get laughed at

No luck so far and Thyanx Bob. I'll remember that when i come back to Cali

Suspicious of wat?? And the number has been disconnected

Yeah those are better known as Trailer wheels . I thought the same thing too when i first saw them years ago

If i just had One deep dish wheel i can copy it. I'd even pay to just borrow a wheel to do it. And why don't AR have a actual phone number to call? Their site just says call a local vendor! Geesh, how argrovatin when u got a question about "Thier" product. smh. Sigh ok, enough complaining for me If you guys could please repost this to other forums I'd appreciate it. I'm tired of looking and seriously have a BOUNTY out on this rim