280z high altitude mode

1 hour ago, TomoHawk said:

Thanks a lot.  I just haven't seen one under there, and I've been under there a lot.

In section EF (Engine Fuel) it connects to pins 9 & 12.  The sensors don't use a common +12V, so the ECU is supplying the 12V on one pin.

If you don't have a CA car you won't have that sensor in there but I'd imagine the connector should be.  Stick your head in the driver side foot well and look up near where the hood-pull cable lies and you should see the connector that you can jump.

I can see Nissan not spending the money to not include the sensor in federal cars, but creating an entirely separate loom for fed/CA cars seems like a needless cost so the connector should be there in all cars I'd guess.

Edited November 29, 20204 yr by chaseincats