Headlight harness upgrade

Just be prepared to drill into the headlight buckets with that kit.

Here's what you'll have to do.

1. Drill 2 holes into one bucket. I would suggest the right bucket.

2. Drill 1 hole into the other bucket.

3. Disconnect the wires from the 9003 sockets (male & female) that are in the kit. (Mark them first.)

4. Thread the wires into the buckets and replace the ends.

5. Plug the male into the socket in the right bucket. Plug the headlights into the new sockets.

6. Mount the relays.

7. Connect the power. You may need an extension by what the site says.

8. Hope that you never blow the one fuse in the kit. That will take out both lights, high and low beam.

I'd suggest carrying extra fuses if you buy this kit.