Hi all.

I've recently got my hands on a 1970 240z 10/70 build date.

Its missing the hazard flasher switch. Does anyone know the wiring for the flasher switch so I can try and make one or know if I can adapt a later one to fit?

Also trying to work out the heater blower wiring, mines been slightly butchered when fitting a stereo at some point and A/C, has anyone a decent wiring diagram for the above? I've looked through haynes but it doesn't seem to line up.

Thanks all.

There are a couple of Hazard switches currently on E-Bay that will work. The hazard switch acts as a buss bar for all of the lighting. jlp

The best wiring diagram in my opinion is in the original Datsun shop manual (body/electrical) they can still be purchased on ebay etc... The manuals are in a set of two, mechanical / body. They are a must have in my opinion. I have a couple of sets. jlp

Cheers for the reply.

Strange thing is that all my lights/indicators were working fine, just the hazards.

I'm currently checking wires for continuity to see what wires go where and where they should go.

I'll have a look for the manual

The following links are to a couple of 240Z flasher switches:

http://www.ebay.com/itm/70-73-DATSUN-240Z-EMERGENCY-FLASHER-SWITCH-OEM-/160709668933?pt=Motors_Car_Truck_Parts_Accessories&hash=item256b0af045&vxp=mtr

http://www.ebay.com/itm/Nice-Datsun-Nissan-240Z-Hazzard-Emergency-Flasher-Lights-Switch-/260923301694?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240Z&hash=item3cc03d9f3e&vxp=mtr

Below is a link to one of the two factory manuals I mentioned in my earlier post. This is the L20 / L24 Factory Engine repair manual, there are no factory Body / Electrical manuals listed on ebay at this time but keep looking and I am sure one will be listed in the near future. The manual looks like this one only it is light yellow, (tan) in color.

http://www.ebay.com/itm/Service-manual-model-L20A-L24-SERIES-ENGINE-Nissan-Datsun-240Z-/320842884449?pt=Motors_Manuals_Literature&hash=item4ab3b9e561&vxp=mtr

I've submitted an offer on one of them.

I also found a copy of the manual you mention on the net, its got some great diagrams/pictures in it which should help me get it back together the way it should be. Being in the UK doesn't help when it comes to sourcing parts!

Thanks again.