Alright, ive done all the researching that i know how to do and came up with nothing. So Iam going to ask. Where are the best spots to lift from on, a stock L28 out of a 75 280z? Ive removed small blocks before, and theyre extremely easy. And im sure eventually i would find some good spots, but i thought i would get the experts opinions first. Any suggestions would be very helpful. Thank you.

Not sure about the L28 but it may be the same. There are lift hooks, one at the front passenger side and one at the rear drivers side. They are attached to the head.

Here's a thread with some alternative spots.

http://www.classiczcars.com/forums/showthread.php?7366-Advice-on-lifting-engine&highlight=engine%20removal

John

Remove hood.

Use one of the tilt accessories on the engine lift.

Watch the transmission tunnel area as you lift and tilt and slide the assembly forward.