Lastly, I need to make the control nomenclature on the facia match the new functions of the system.

I’m going to print new control labels on adhesive backed mylar and cover with clear tape. The place these over the markings on the facia plate. (See pic)

I’ll have to paint the embossed “DEF” above the bottom control black.

This is not finished yet, but it's pretty easy and should look OK.

Here's a pic of the control panel. Realized my selector switch nomenclature was not clear and went with symbols. (see pic).

I need to redo the lower strip, as it has a defect and reposition the middle strip as it's not quite straight.

Looks great Julio.

My Vintage Air unit is doing great in our 97 degree weather in Florida!

Derek