Ah, I see. Your talking about parts that are on the underside (inside the quarter panel, not on the outside. I was thinking that you were talking about something that was under the metal ring that the gas cap secures to (i.e. on the outside of the vehicle)

That picture appears to be the filler hose used from 10/72 production date. My earlier cars filler tubes are slightly different.

Ed,

If you can't find a replacement rubber seal make one from an old inner tube (use the old one as a template).

Cheers,

Peter

Ed,

If you can't find a replacement rubber seal make one from an old inner tube (use the old one as a template).

Cheers,

Peter

Peter, Thanks for the advice.