Search the Community
Showing results for tags 'fasteners'.
I am in the process of installing the bucket’s interior. Often times I find that parts need to installed, removed, adjusted/repaired and then re-installed. A while back I bought plastic rivets for interior. Two sizes are required. The taillight panel requires 8. I believe they are $3.00 each. The interior plastic requires approximately 40. These are larger and come in bags of 10 at approximately $7.00 a bag. I don’t think that they are available at your local hardware store so there is shipping cost and worst of all for me time delay. So, the cost of these plastic rivets is annoyingly
Hi ladies and gents. I'm restoring an early 01/70 240z here... looking to restore the original finish on some of the parts and fasteners, etc. Since it's close to a "paint" related question, i'm posting it here, but feel free to move it if incorrectly categorized! The photos I have of the tear down are not detailed enough. I'm looking for some of the following things: brake lines and brake line bracket coatings (cad, yellow zinc, silver, dark green?)rear brake drums coatings (black, natural finish, clear coat?)rear differential coatings (all black? black housing, aluminum coloured cove
I'm just rifling through the 9 million bolts here with the 01/70 resto project. I found a bag of these bolts, brand new (top right: 08120-8501E) that sandwhich the trans halves together. The ones I have pulled from the trans, and also some of the ones that I have discovered in the box-o-bolts have a head marking that says TR on one edge of the hex, and 7 on the opposite edge of the hex, and the washer is slightly thicker than the new ones. On the new one, it has the italicized "7" that I have come to expect on many of the datsun bolts, as I've seen 7's and 9's embossed on the hex head