TTDRIVER

I recently repainted my engine bay and I removed the metal clutch/brake lines that run along the firewall in the bay. Now I need to reshape and put back the proportioning valves and metal lines but don't know where they go and how they are shaped. I was wondering if anyone had a pic of an engine bay with no engine so that I can use as an example for mine. I would really appreciate it. Saro Fagerian

For the people who are interested, I will email you a larger one. I had to make the image smaller to post it.

Early 4 screw SU carbs with intake manifold, linkage, balance tube, air filter housing everything. Intake manifold looks brand new. $175 obo

Early 4 screw SU carbs with intake manifold, linkage, balance tube, everything. Intake manifold looks brand new. $175 obo

Thanks for the help guys, but I do have the spacers there and it dosent look broken. The spacers narrow out in the center which creates a v like shape and because of that it has a gap. I have never ran these carbs and was wondering if the gaps would cause a leak. Thanks again Saro Fagerian

I was looking under my carbs today and I noticed a gap between the intake manifold spacer and my SU's. Its located right under the each attachment of both carbs where they meet the intake manifold. The gap is between the carb and the spacer when looked at from under the carburtors. Why is there a gap there? Is this normal or is something wrong? I have a picture of it with a red line showing you where the gap is. Sorry picture is kind of blurry. Thanks for the help

Early 4 screw SU carbs with intake manifold, linkage, balance tube, everything. Intake manifold looks brand new. $175 obo

Any one selling a hatch for a 240z? The one I have now is very clean except for a rust hole about a 1/4 of an inch big on the edge of the window seal. Other than that its perfect. If any one has a clean one please let me know. Prefer white but dont care Thanks

Sorry its for a 240Z. Thanks for the sites

I was wondering if any body knows where I can get the clutch and brake lines that go to the master cylinders. I need the long hard metal ones that lay against the firewall in the engine bay. I broke mine trying to take them off. Do I need to get them made or does some body make new ones I can go and pick up? Thanks

True

Very clean and in perfect woking condition. This thing looks brand new. $40

Buyer decided not to buy so still available.

Everything was fine on the tranny no never rebuilt but was taken out for a v8 swap.

Tranny came off running 1970 240z $50

Sure. Call me on my cell phone (818) 648-5143

Excellent condition, threads are perfect looks new $20

Early 240z valve cover came off e31 head. No scratches or damage to it. Discription 2400 NISSAN OHC $90

I asked him and he siad that he has a watanabe 8 spke 15 inch 7j et 15 for the front and 15 inch 7.5j et 8.5 for the rear but they are going for $1200. He also has ssr longchamps 15 inch 6.5J ET 17 all around for $750. Ill let you know if he gets anything else. Thanks

I have a friend who is bringing wheels thru orders from Japan. He can get almost any used wheel for your S30. The prices are reasonable and pic are available. I will try to post some of the pic he sent me as examples of what he has. If I don't put all pic please email me for one. Thanks Advan a3a $1000 obo 14 inch (front) 6 j et +6 (rear) 6 j et +6 Cross fever 14 in very rare 2 wheels only $500 14x6 Wed sports Racing forge 2 wheels only 14 in 0 offset big lip $600 Watanabe 8 spoke 14 in 6.5 0 offset $800 many many more prices might be negotiable

Early 70 valve cover clean no damage in anyway. make an offer

No prob. Ill pm you if I dont find them. Thanks again.

Thanks Bambi!!!

Thanks! So local parst stores will have the caps?