Everything posted by joe newsom
-
Speed Odometer Reset
It does bring up the question though. What if I were to buy a new speedo would the mileage then be 0 on the car? Sent from my iPhone using Classic Zcar Club mobile
-
Speed Odometer Reset
Was curious if I am using a odometer from a donor car should I use mileage on that or should I reset if that is possible? Sent from my iPhone using Classic Zcar Club mobile
-
Stuck Heat Lever
Awesome info Sent from my iPhone using Classic Zcar Club mobile
-
Relay Mounting Locations - Firewall? under dashboard
Not to sound like a noob, by why the extra fuses and relays ? Sent from my iPhone using Classic Zcar Club mobile
-
Harness wiring
No not at the time, but I will be putting them in Sent from my iPhone using Classic Zcar Club mobile
-
Harness wiring
Got all the burnt coating off and the wire looks in good shape. Makes me believe that it was from engine source heat. I did cut out out and replace any questionable wire. I did notice one connector that looked very hot and I believe it was a relay of something todo with retarding the ignition In the second pic I pointed out the box. Looks like most of wiring on that side just got too hot. Sent from my iPhone using Classic Zcar Club mobile
-
Harness wiring
Anyone have good suggestions for sheathing on the engine wire harness. I have noticed towards the end of the harness by the coil connections there are a lot of charred wires. Sent from my iPhone using Classic Zcar Club mobile
-
Deja Vu: 1971 Restoration
Transmission turned out great. How did you get it to look so shiny Sent from my iPhone using Classic Zcar Club mobile
-
Dash cracks
Question for you guys. I have two cracks about 5 inches long. In your opinion is it worth trying to fix? Do those covers look good? What are the fix options? Sent from my iPhone using Classic Zcar Club mobile
-
Horn repair
Anyone know if you apply contact cement or some glue when applying new paper gasket ? Sent from my iPhone using Classic Zcar Club mobile
-
Parts Identication
Thanks Sent from my iPhone using Classic Zcar Club mobile
-
Parts Identication
Is it necessary if I am converting it to a manual? Sent from my iPhone using Classic Zcar Club mobile
-
Parts Identication
Can anyone identify these parts and have a suggestion of where to purchase. The first pic looks like some type of capacitor or suppressor on top of the coil. The second pic I have no idea Sent from my iPhone using Classic Zcar Club mobile
-
New connectors
CO what did you need from vintage connections? Sent from my iPhone using Classic Zcar Club mobile
-
Looking for rubber grommets
Thank you very much Sent from my iPhone using Classic Zcar Club mobile
-
New connectors
CO the last pic is the one I can not find on Eastern Beaver Sent from my iPhone using Classic Zcar Club mobile
-
Looking for rubber grommets
Anyone know where to buy these rubber mount/grommets that the wiper motor mounts too? Sent from my iPhone using Classic Zcar Club mobile
-
New connectors
Hm maybe I need to spend some more time on each site No problem on any piggy back orders These are some of the connections I am looking for Sent from my iPhone using Classic Zcar Club mobile
-
New connectors
CO I am thinking the order I do will be from Vintage Connections. Their site seemed to have the parts I need. The Eastern Beaver seemed more geared towards motorcycles. Unless I am missing something.. I am trying to replace about 30% of my engine harness connections. Sent from my iPhone using Classic Zcar Club mobile
-
Wiper arm linkage assembly parts
Pretty cool Sent from my iPhone using Classic Zcar Club mobile
-
My 240z project
Got the Noico sound mat down, then put the tunnel cover down and firewall insulation back up. Ready for heater box and dash components. Sent from my iPhone using Classic Zcar Club mobile
-
New connectors
Thank you will look then up Sent from my iPhone using Classic Zcar Club mobile
-
New connectors
Anyone have a good source for buying new connectors on the wiring harness. Ideally the closest to stock as possible Sent from my iPhone using Classic Zcar Club mobile
-
New vinyl question
No the console doesn't hide it, wished it did. Those pics look more accurate. Guessing I will need to do some modification to it.. thank you Sent from my iPhone using Classic Zcar Club mobile
-
New vinyl question
I bought a vinyl kit and the tunnel piece does not seem fit well. I am not sure if I missing something or maybe it's built wrong. But the slot for console fastening is in the wrong location. I could adjust but the slot would appear that it would show. Or does the console cover it regardless? Are there some post on this site with the order that the pieces go in? Sent from my iPhone using Classic Zcar Club mobile