Johnny wick

Just got a servo diaphgram!! How do i test it before installing it? Any method that will prove that its not shut?

What kind of glue do you use to paste the lense to the lamp body back? Just clear silicone? What Brand?

OK!!! Just wanted to verify!!! Thanks

Just replaced my fusible link yesterday, which was kindly sent to me by Michael Mcginnis at Banzai Motorworks. The male connector was not bad, so i just cleaned it with a brass brush wire and replace the plastic Shell. The female which is attached to the starter was fully replaced as it appeared to have taken a lot of heat. Anyway, while craking the car out of the parking in reverse and sliding 1st, i did notice the car coughs and presents a slight hesitation. Not as it used to before, but still some hesitation. Is this normal when the car is cold? I have deleted all of the emission crap on top and asides of the balance tube. Could this be cause of this coughing and low rpm hesitation?

Anyone has 3 spare M4 X 30 mm black screws for the license plate lamp assembly?

Just got the parts from a supplier in Canada! I guees im ready to install my AC finally!!

Taking the car to the elevator this friday and will let all of you know!! Will take pictures while there!

What will be the restoration procedure?? Cleaning with scotch brite pad and painting with black matte spray?

So i must verify the rear differential mounting seal??? To be sure its tight enough?

I have a clunk sound that appears whenever i lift the accelarator pedal at slow speeds. I believe it comes from the rear suspensión. Could this be transmission mount seal? I will take the car to the mechanic so he can lift it on the elevator. Any clues??

How come a Volkwagen beetle hand brake can be use to stop the car while rolling? This car is supposed to be superior!

Zed, If i manage to get a Throttle opener control valve and servo diaphgram from a 260z, how do i test them to verify they are fully functional??

So bottomline, it just works to lock the wheels when parked, period!!

Okay i bought a black matte spray paint use to paint plastic on model cars. Will this work?

This is weird. I use to have a 1959 VW bettle which used 4 drum brakes and one day the floor brake did not engage and i stopped the car using the emergency brake without bumping another car.

I have an issue with my emergency brake! If i want to stop the car with the E-brake it is not posible. It will only stop with the floor brake. However it does lock when parked in a hill and the car will not move. what could be wrong here? will i need to replace the brake shoes or pads or else?

okay so its better to use a Green or blue scotch bride pad with soap and then dry it with a towel? ill see if i can find the black matte vinyl spray. Does it really have to be Vinyl matte?

What sandpaper do you use to sand the original peeled paint? its just a small peel! or should i just spray it with the vinyl black paint spray without sanding?

I have an issue with my emergency brake! If i want to stop the car with the E-brake it is not posible. It will only stop with the floor brake. However it does lock when parked in a hill and the car will not move. what could be wrong here? will i need to replace the brake shoes or pads or else?

ok!! Thanks! I dont know why people are advising that i need to have both the throttle opener valve and servo diaphgram installed on top of my balance tube so it can idle up the carburetor when the AC compressor is activated. I need to clear this out but do not seem to find a correct direction.

This is great!! where did you get it???

Am about to install a Vintage AIr gen II mini kit and Sanden 508 Compressor. I was advised i needed a throttle opener valve and servo diaphgram to keep my idle up when turning the AC on! Does anyone have these parts functional?? Cant stand the heat! If you have pictures i will really apreciate it!!

Not yet! Will take them to him this week!!

What kind of spray paint can i use on the speedometer gauge? Black Flat can spray? Is there an specific Brand? Should i use sandpaper to peel the inners before spraying?

What kind of glue should i use to paste the SU Carbs to air cleaner gaskets? Crazy glue? or RTV black silicone? http://www.ebay.com/itm/Datsun-240Z-1970-72-SU-Carb-to-Breather-Gasket-Air-Cleaner-Carburetor-Nissan-/291428319728?hash=item43da7b41f0&vxp=mtr