moelk

Put my "new" seats in the blue -72 and thats it. Now my barnfind presents itself as a nice car both in and outside. And now it will be for sale😫

Mounted my original Fairlady grille.

Mine had the same issues. I took the turn signal switch apart and cleaned it. Then it worked again. But be carefull. If you bend anything you will have other issues like brake lights....been there.

Started with some interior work on the blue car. Painting interior pieces white as they should be. Not yellow as they almost were. Then they got a quick wash.

Fitted my jdm 5speed gear knobb on my silver 240z. Looks fantastic! Also changed my window "molding" because it had a dent that i realy hated. Before After

Drove my barnfind from my mechanic 170km. First time i drive it and this weather spoiled the fun of it👿

I bought these 3 years ago http://www.thezstore.com/page/TZS/PROD/classic21g/24-5517 Workes well and hasent worn alot. Havent been on the track just the street.

Passed inspections with my silver 240z! And my blue barnfind moved by itself for the first time since 1996! 👍🏻👍🏻👍🏻👍🏻

A friends car for comparition.

Remove the speedometer and take the needle off. Put it back around 5-10 min (depending on what year speedo you have) below the pin it rests on and then gently pull it to the correct side of the pin. This should give a correct reading. Hook the cable up and take it for a test drive. You may need to do it a couple of times to get it 100% correct so dont put it all together before you have tested it.

👍🏻

It was these 2 metal things that was the problem. Needed some adjustment and now we have brake lights!!!!!! Thanks for helping!!

Thanks Steve. Im determine that its the turn signal switch now. I just rememberd that i took it apart a couple of month ago when i had the dash board out. I had no turn signals and i fixed that but probobly i adjusted something that made the brake lights stop working.

I have looked at these. Maybe i missed something or do to language did not understand all info.

240z -73

My brake lights dont work at all. All other lights work. I have power in the brake light switch behind the pedal. And power up to the blinker switch. I cant find power coming out of the blinker switch. Does that mean that the blinker switch is the problem or could it be the hazard switch (doesnt the power goes from battery-fusebox-hazard-brakeswitch-blinkerswitch and back to the tail lights). Could someone confirm./Andreas

Went to a car meet and track/drift day. And there was a Z on the track and some realy nice rides to look at.

Thinking about black Rota RKR 15x8 instead of these rewinds but im not sure.

Do it!!

Covers installed!

I can see good enough but not as good as i could with my door mirrors i had before. When i first had mounted these fender mirrors it was kind of scary to drive but you adapt fast and now its not an issue. So i must say they are functional.

Left cover installed. Right one will have to wait till tomorrow.

Yes. Just test fitted in the pic.

I have stopped trying to adjust every gap to be equal. I just cant make it work.

Drilled the holes for the headlight covers. Hate to make holes in my car but now its done.