moelk

Thanks! Had never seen those before!

Do you have a pic? Have never heard of Bre head light covers and would like to know what it is.

Finally got hold of a rear bumper without rubbers to go with my rubber free front bumper. Looks great! Big thanks to Jim (jfa.series1)for a great deal.

Nice progress Fabian!! love the blue color! Wish I dident sell my blue 240z : ( Just some correction regarding the km/h speedo plates, I'm the one making them an Sean sells them for me ; ) And like you said zcardepot also sells them. Keep up the good work. /Andreas

Looks great! Aim for a zx (na) 5 speed and a Subaru STI 3.9 diff. Easy swap and GREAT performance.

Well i put it on another dyno the week after but the guy who owned that shop don't mess with carbs and did not have much time so well at least I got some numbers. I have less cr than you (around 10) but I made 180whp/240nm with no porting done to the head (and the same mesh filters as yours). I'm happy with does numbers but will do a dyno tuning next spring.

Nice numbers!! Congrats! I have 150/F16/160 main/tube/air. Runs great but I haven't had it tuned properly on the dyno. First try on the dyno I went up from 155 to 160 (air) because it went a bit rich at the top end. Then we had some problems with the dyno equipment and had to stop. So at least I know it runs well but would like to do it again to play with timing and other things.

Niiiice!!!

New wires!

Short trip...leafs are falling and soon the snow too : (

I might be interested. Sent you a pm!

IF you like to sell that rear bumper ill buy it?

What i know there are no benefits of useing or not useing the zx module (I don't use mine)with the msd 6al but by not useing it you take out one thing that could cause problems.

You don't need the black box/module on the distributor if you have a Msd 6AL. It works with it to but not needed. You can get an adapter to get the tach to work or you can get a tach from a 280z and make it work.

You have the clutch diff madkaw? They are known to be a bit more noisy.

Damn!! I want a rear chrome bumper without holes. But im in Sweden and they dont answer any emails regarding shipping. Cant find a way to order and calculate the shipping on their site? Hate to miss this deal!

Nope! Both wheels are spinning and im impressed buy how well the sti diff work. No noise at all, total silence. And its smooth!! Im no expert and time will tell but i feel like the Suretrac version i choosed is the perfect diff for my car. Hope your machine shop do a good job for you zealous and that you get the parts back in time. Whats the plan for the engine?

I love my set ; )

Well. Sti diff is in and first test drive done. It hooks!!

Started the diff swap! R200 3:9 going out, R180 3:9 Subaru STI going in.

Very very nice!!!

I run tripples but i guess it will work fine with SUs. Its not a "big" cam.

I have the stage 3 from msa and thats a great all around performing cam. Good idle and low end power and makes power up to 6500-7000 rpms.

New brake booster installed, sparkplugg gaped to 1mm and a small adjustment to one of the carbs: Brakes work like never before, very very good! Engine feels smoother, may try to increase the gap to 1.1 mm to see what happens.

I used Arp head bolts.