Mike

I'll see if he has any pictures. Good idea.

I think you are missing the other RAR files because some of your stuff is missing. A RAR archive can be split up into many smaller files. So, instead of one large archive, it's many. A split RAR archive will have a parent file with a .RAR and children files with .R00 .R01 .R02, etc. Problem with RAR is that you can download part of the archive and it will attempt to uncompress. It should fail and give you an error, but, it doesn't. Anyway, the install.zip file should be unzipped into the same folder as all of the .RAR files. When that's done, just double click the INSTALL.EXE. When you do this, you'll see a VISPeR Installer appear in your task bar. Wait for a long time (around 30-sec to a minute) and it will appear.

Hi all, One of my co-workers would like to know the value of his 1976 280z. He's the original owner and all of the serial numbers match. It's NOT a 2+2. The car has no rust and has been garaged its whole life. The paint is a bit dingy, but, that's expected. He said around 200,000 miles are on the car. I've worked on the engine with him during lunch one day. It's in good condition, but, at that mileage, I suppose the engine should be rebuilt. I didn't see any smoke, but, it's running rough. He doesn't drive it much anymore and is considering selling the car. Everything is stock. The engine is EFI. Not sure what else to say about it. Let me know if you need other info to give me an approx value. Thanks!

My theory? Never let a techno geek (or engineer) design software. 90% of the population would never know how to use it.

I find it hard to believe that your mechanic can't get ONE carb to idle below 900. You should be able to bring it down so far that it will almost die. I also saw dieseling when I used the 'cheater' idle screw to keep my idle above 1000rpm. I did this because it ran like crap before I knew how to adjust SU's. The cheater idle screw, located on the very top of all the linkage, should never be used. Carbs that are balanced and adjusted correctly should not need this screw.

Getting all of this to work even for me was a bit of a technical thought process. You must first save the files to your drive, find a package that supports RAR formats and will uncompress multiple files (winrar does this), and then put it all together to get the setup to work. Then, you must uncompress another folder manually to get the sounds. The game really isn't that good anyway. It has a few Skylines in it, but, the play isn't something to write home about.

Go delete your offline and temporary internet files. You can also right-click on the image to get the URL. Paste that into a browser... bingo. Ozlime your link seems to work ok. Steve, I can see " __hr_" or something like that in your link that shouldn't be there. Something that AOL is doing? Copy Ozlime's link and your link into a text editor and you'll see what I mean.

Nate, wasn't it you who said that Americans are stuck on themselves? Spoken like a true American. I see a smiley in your post so I can only assume that you're kidding. I just want to make sure that everyone stays happy here because we have members from all over the globe. Kats is from Japan -- his English is impressive!! And many others are from UK and Australia. Anyway, that was a general message pointed at everyone to keep things going in a good way...... My comments above the 'serious' topic were intended to be humorous. :cheeky:

Steve, that link is no longer valid. How about attaching the image instead?

I think I know what you're talking about... have you checked ebay at all?

Dakota, somehow I don't think you're kidding.

Hi Alan/Kats, Ok, I see the problem from the original picture. You are right, he did an excellent job fixing the hole! I can't even tell there was a problem. Kats, are parts and services expensive in Japan for early Z cars?

Thank you!! I couldn't figure out how to make my car go!!

Hi Kats, That dent in your dash is normal. It was intended for a switch that was never installed. My 1971 240z has the same problem.

Looks like you need to copy the URL's into a new browser window. That site doesn't allow direct linking from another site. Open a new browser window, and copy/paste the URL (address) into the new one.

Zoom... Post a message in the wanted area of our forums. Ask to see if anyone will DONATE a stock manifold to you. I don't think these are very hard to come by and should be laying around somewhere. Man, I remember throwing away at least 2-3 of those a few years ago.

This was posted to the mailing list by Guus (Z-point). http://www.aus300zxclub.com/events/bathurst/bathurst.htm Pretty nice stuff!

Guys, I think we have our first CONVERT here. I am excited to see that you decided NOT to sell your Zcar because of our club! We are doing good in the world!!!!! All kidding aside, I'm glad you're around. Let us know when you have more questions and I know someone will be able to give you a good answer.

Go with a 6 to 1 header. Motorsport sells a decent one. Don't, I repeat, DON'T buy an exhaust piping kit. Buy, the header and take the car down to your local custom exhaust shop. They'll install new pipe that is much better quality. Go with a 2.25" or 2.5" exhaust.

How many of you have a story to tell about a situation involving a police officer? I mean, there are times in my youth when I decided to either hide or run from the law. I'll post my story, but, I also want to hear yours. This thread is a result of quite a few stories told on the mailing list. However, none of them have been shown on the website. I think it's great and of course the club does not promote this kind of activity what-so-ever. So, let's hear 'em!!

If your feet were gay... then you'd have GREAT taste in shoes.

23%.... Interesting test!

Nice one Ben!! What sort of front air dam is that?

Excellent, thanks for the info. I have a few leads on these. I'll see what happens in the next week. Don't these things just snap into place? I think I bent my old ones when I took them off, so, those are shot. [m]

Kmack/2manyZs, are they new sets ? Or, at least in good condition so I can use them on my restoration project? I'm interested if you are willing to sell. There's got to be a way to ship them safely. Maybe tape them to a piece of wood and put that in a box? Let me know what you think. -- Mike