lm71z

Well apparently the passenger side door panel is the only one that's available.

Would anyone happen to have the part number for the door dovetail screws?

Thanks for that link. Can someone clarify for me what the correct/current part numbers are for the door panels. According to that thread, the part numbers are:H0901-N3300, H0900-E4100. The problems is that the first number doesn't even work when searched in the Nissan system.

Nevermind, the screws in the picture are not the right ones, they're just flat topped bolts.

I tried 80577-21000, which was then changed to 01121-00043. Neither of them are available through Nissan. The same screws must be somewhere else on the car with a different part number.

Does anyone have the right part number for these hex shaped screws that screw the door strikers and stoppers to the door jam? I've tried the 2 part numbers that the Nissan FAST system gives me and they're not available. There has to be another part number for these screws; I can tell from this picture that the number is different from the numbers I checked with Nissan.

I was under the impression that Nissan is still producing the door panels, but I just checked with Nissan and they told me that the right one is the only one available. He also said that the grain is different or has been changed. Has anyone else been able to get black door panels for their 240z directly from Nissan? I'd hate to pay more than I need to for these things.

I just received new 240z rear wheel cylinders from Nissan. One of the part numbers is 44100-N3001(supposed to be the right one) and the other part number is 44101-N3001(supposed to be the left one). The Nissan fast system told me that these are supposed to be for the right and the left wheels, but the ones I received are both for the right wheel. What is the correct part number for the left wheel cylinder?

What's the best way to remove the 'Datsun' fender emblems without damaging the car's paint or breaking off any of the pegs on the emblem? Is there any way to get at the other 2 pegs behind the wheel well from behind?

I'm installing a new ignition switch on my 240z and I've run into a frustrating problem. There are 2 screws mounting the ignition switch to the steering column and I have no idea how to remove them. The only way I can think of is to use an screw extractor drill bit to remove the screws. Is there any better way to remove them? Any way will work, even if it means breaking the old ignition switch.

So N3300 is only for the 73' 240z's?

I was looking through the Nissan Parts program I have and noticed that there are tons of different part numbers for 240z door panels. What are the correct Nissan part numbers for black door panels?

Does anyone know where to get new condensers for the voltage regulator, the alternator, and the ignition coil? I've checked the part numbers for the voltage regulator and alternator condensers and they're unavailable. Does anyone have a working part number for the coil condenser?

Is the coil condenser necessary? The bracket that came with the new coil doesn't have a small bracket for a condenser.

What year 240z is that a picture of? Mine is a 1970. The resistor that is currently in the car is clipped on top of the coil.

I don't really understand what you're saying. So how does the resistor attach to the coil bracket? Are you saying that the resistor is not supposed to be attached to the top of the coil?

I have a new ignition coil and resistor for my 240z, but I have no idea how to mount the resistor onto the coil bracket. Nissan changed the design of the bracket for the coil and the resistor, so I'm confused as to how I'm supposed to do this. Is there some type of clip or screw I need? The coil bracket has one hole on the top of it and the resistor also has one hole.

Thanks for the advice guys. What do you think about using something like Goof Off?

My dad went through about 3 radiators from motorsport a couple of years ago. I'm not sure what brand it was though. MSA doesn't mention what brand their replacement radiators are.

Can anyone tell me the best 3 or 4 core radiator I can buy for my 240z that looks somewhat original?

There's minor white overspray on some of the black plastic panels in my 240z. What can I use to remove the overspray without ruining the plastic?

I have a series 1 1971 240z.

Does anyone have the Nissan part number for the black air ducts that go on each side of the front of the engine compartment? Are they still available new? Mine are brittle and have pieces chipped off of them.

The old spark plugs were brown when I pulled them. What does that mean?

What's the best radiator you can buy for a 1971 240z that looks like the original one(with the fan shroud)? My dad said the ones from motorsport are crap; he went through 3 or 4 of them with his 260z because the kept leaking.