Zedrally

Ah. European !!!!! What was that old adage about Greeks? Cheers MN

I wonder if it has a metal nose?

When you say you had the fuel system checked, what was checked? Pump, filter etc??????? Need you to be more specific, does your 240 have an electric pump or is it manual, all information you can provide the list members with will assist in getting a quick concise answer. Mike

Didn't you sell your car Alan? I'm sure that would be the only way you would allow your old avatar being used?

The REAL reason people knock flat tops is that they don't understand them. When overhauled correctly, with the correct kit they will perform BETTER that round tops. I'm running both types in different cars and the flats are definately better than round, but only after a total strip down and re-build. Now for the bad news.... I would seriously doubt that they would work in your situation as the only way to adjust the mixture is by altering the float level. This is the biggest plus for round tops and the only solution as a SU type carb possible for you as I see it! Why not play around with cams, possibly a rally spec cam would solve your low end power problem?

Those brackets coming off the front of the bumper are interesting. Are they for a light pod or Roo bar?

Well, is this special toooooo. Guessing as it's LHD, then thats reading up to 200+mph! Go Zed Go!!!!!

I have a similar wheel [smaller diameter than the standard Z wheel], it doesn't have the leather cover now,just a hard foam molding. Any ideas what it is?

Sure, why not. If it doesn't work then buy some ATF. Can't hurt a thing, only performance and ego's! FWIW, I think tranny oil is heavier weight?

Long live 2+2's! Only a metal nose 2+2 could be better.

Rob, all you need to do to make them compatible is to turn them 180 degrees.

I think it might be like a MX5?

Don't suppose there was a G-Nose version of this factory V8?

Had same problem in 2 cars, one was a dirty tank [240], the other was capacitor in distributor [260]......take your pick!

Interesting, I've acquired a slippery out of a corolla, anyone have any ideas if it will fit?

260's will fit, but you may have to change both sides. I think the same would apply for 280's?

Vic roads has me as a 1973 Datsun Coupe, Tare 1000 Somewhere, somehow they have upped the weight?

Alan, without actual physical evidence, then no-one can say that it existed. However, I feel that there must be sufficient doubt at this stage to completely rule out the story. The statement that was made about not buying it because it wasn't complete indicates that there was something made in metal which the one armed man believes to be a g-nose. It must have been an ad or something he saw or read that made him remember, after all we all have that repository of useless knowledge tucked away waiting for the right moment. If it was, then knowing him it will still exist, somewhere in his archives. It up to him to establish the validity of this statement and I will remain on the case. In the mean time let's both keep an open mind as it's not beyond the realms of possibility. In one way I can't see why the G-nose couldn't pressed out, most all other body parts are, and if complex curves are needed then the assembly is made in pieces and assembled. A good case for this would be the 2+2 that I would like to replicate. If this was the prototype for what was to be the 2+2 then they would have needed to press the nose out to manufacture sufficient numbers, after all the bonnet is complex enough and it was pressed. Anyway, enough of this grasping at straws so to speak, lets keep that open mind and await further developements. Mike

Alfa, If you ask a question then you can expect an answer, what neither Alan or myself have is a crystal ball [workable, of course]. I'm the one who asked Alan if what I heard was true [2 G-nose varients] and Alan supplied the reply in a PM, if it's so upsetting to others then why not simply come out and ask what the answer is, instead of flaming Alan. Now, I going to take an aspirin and go back to work. Ha, 3 g-nose types......

Bit hard on Alan, aren't you Gav, Unless I've missed something as well no one apart from myself asked about different g-nose versions, and even then I didn't specifically aske the question as I wasn't aware that there where different versions. Simply put, I was offered a garage full of datsun bits and a g-nose was amoungst it. Knowing the age of the owner and his rally history it was within the realms of possibility that some parts may have been "works" bits and asked Alan for advice. I'm feeling sorry to Alan for being public on this, maybe in future we shouldn't discuss interesting "bits"of history, just PM between ourselves! I really don't see what your problem is? There isn't any secret agenda about penile extensions, just general discussions about some interesting possibilities. Mike

Alan, Alfa, Gav et al, After reading Gav's response I felt it would be unfair to keep this private. After all, I did raise the prospect in an earlier post, so in fairness I'll continue the discussion. The one armed man replied to my question last night. Out of respect he wishes to remain anonymus as he doesn't want to be inundated with e-mails, visitors, flames etc. he has asked to have his privacy repected. His response is as follows: I wouldn't go out re-writing history just yet, but if he said he just about brought one, that's pretty good for me.

Alan, Bad news I fear. My ears didn't hear things. I'll PM you with details. MN

Alan, You're quite correct, it was discussed in a previous thread. Vicroads has the 240 "tared" under 1000kg. [980 from memory]. So I can summise that every State body has it's own rules for determining weights! MN PS. have jsut been in touch with the one armed man and expect a reply tomorrow.

It's a real pisser!

Alfa, My money's on the fuel filter. I had a similar experiance in the red zed, only this occured more than once. Eventually, I had to drop the tank and flush it out to remove all the crap that was coming out of it. FWIW, you should be able to see petrol thru the filter, from your description it's sounding pretty clogged up. Good luck! MN