JSM

Cool. Ty very much. You have any pics. I'll PM you my phone number so you can text me if it's easier.

This left one is for the 79-80. The right one is for 81-83

Thanks! I see it now.

Curious could you post Kissimmee, FL? I know it was on south ORange Blossom trail and is gone. How far back can a dealer trace a vin#'s. I'd love to try and find my dads old Z.

I'm only 3 hours Away. If I do that I'd have to take my wife and then it really gets expensive!

Don't know if anyone needs this but it said share with friends so here you go!

FYI couldn't find a single vacancy on the island.

Saw this posted at Hybridz and thought I would share: On march 10th Adam Carolla is putting a seminar with racers and teams from back in the days of racing Datsuns, this panel is to include Pete Brock, John Morton, Sam Posey, and Chip Robinson. The following day Saturday the 11th, the Cars and Coffee event will be held with a big emphasis on Japanese cars, my 5510 has been invited as well as several of my other friends Datsun Z's. So if you make it out, should be well worth the visit, stop by and say hi. https://www.ameliaconcours.org/car-classes.aspx Japanese Racing - The Men Behind the Victories Seminar3 p.m.Adam Carolla hosts a panel discussion with some of the people that contributed to the racing success of Japanese auto manufacturers in the United States. Panel includes: Peter Brock; Tommy Kendall; John Morton; Sam Posey and Chip Robinson. The Ritz-Carlton, Amelia Island, Talbot Ballroom$35 per person –Tickets can be purchased online www.ameliaconcours.org or at the door on the day of the event. Open to the Public. Limited Seating.

Drool!!! I'd never go home!

Still check the oil for milky condition. You want that oil out of your motor ASAP if there is water in in.

So curious you washed the tank and got all the big chunks of rust out and then used a only a pint of pure muratic acid for 3 mins? We're you also constantly turning the tank? If I recall when I did mine I cleaned best I could filled half with water and added a hole gallon of muratic acid then filled the rest with water. I let mine sit for about an hour, dumped the nasty mess and let a hose with clean water run for about 15 min.

Good info. Thanks. I did my 78 with muratic acid and clean water. I didn't have the flash problem but on the 75 tank I need to do I will remember this.

This is a 79 ZX clock. Notice how the face isn't completely round. I just pulled this today as I was curious on your post and curious myself. You might be able to figure something out but it won't be easy. The other thing is the plastic face screws right to the front of the 3 pod bezel making adjust the hands an issue. And of course it doesn't sit square either. Two wire hookup is a breeze and still tells time pretty good!

Sold, thanks Spoofan.

The condition of the start is what has me concerned. That just doesn't sound right. Did you check to ensure you PCV isn't clogged? Also check to make sure you water Is not milky.

I notice your distributorless. What Ignition are you running. Coil pack reminds me of an old electromotive tec2.

Don't tell that to Edison! Just look at it as one more way to not make a lightbulb work!

Anyone have a decent set at a reasonable price?

So any luck?

Did you also check the fusible links in front of the battery? Those are also fuses. Use a continuity tester don't just assume they look good.

That's fine, but what is the purpose? If air is needed to be drawn in, the sealing does what? It's still open to air. Maybe it helps with control of the needed air?

What was the logic on the sealant?

In the few I've done I've never seen any sealant that I can recall. I just did my power booster and there was nothing. Maybe the PO dabbed some on just in case it weeped interernally? I've never lubbed the plunger. It should be pretty dry in there.

Hey Chickenman why is that.

Anything for the ZX in the works?