Seat upgrade -350z seats

[HusseinHolland]

Got back from Baltimore yesterday afternoon, so back on the seat install today. Had to do some more pounding on the tunnel.  Metal only stretched so far, then it split, about 3" wide, a couple inches above the seat crossmember.

flange tore where the black paint is on the tunnel.

dynamat after paint

after that, I welded the rail adaptors - tacked in place, then removed to stitch  

plug for stock seat belt bolt hole

(Wesco) seat belt outer

Wesco seat belt inner , also added receiver snaps in the carpet for the leather handbrake cover

Driver's side, rear attachment

sill spacing - just clears the seat belt

Seat will be re-upholstered, just not today

pass seat out to install cushion, harness routing

Headrest cushions have to be stripped to fit the new leather covers, the original covers are glued to the foam

 

Edited January 2 by HusseinHolland

[HusseinHolland]

Daytime pic with headrest. New leather for the seats has the same green stitching. I also went with a dark grey inset for the perforated panels. Not sure it's dark enough though. Seems more like a medium grey to me. Pics later

Edited January 2 by HusseinHolland