I have a 76 280z with su carb set up. can someone help me out to install the e12-80 ditributor ? The dizzy is on, just need help to splice the wires. do i need the 240z harness to do this? thanks. louie

Here are some links to other threads that address these issues:

http://www.classiczcars.com/forums/showthread.php?t=32704&highlight=E12-80

http://www.classiczcars.com/forums/showthread.php?t=34607&highlight=E12-80

http://www.classiczcars.com/forums/showthread.php?t=34559&highlight=ZX

http://www.classiczcars.com/forums/showthread.php?t=34192&highlight=E12-80

Much information there, no need to repeat it all.

Good luck!

This is the link I used to help in my ZX swap. I have a 240 but the instructions are more detailed for a 77. It's probably worth a look...

http://www.atlanticz.ca/zclub/techtips/distributor/index.html

hope this helps!