:stupid: :stupid: :stupid:

I managed to obtain an old radio that I would like to install in "Precious" (as my She Who Must Be Obeyed calls my Z).

Problem is, I'm not sure which wire goes where. (If you saw the underneath of the dash in "Precious" you'd understand. The previous owner turned it into an auto electrician's nightmare).

The radio's details are;

Clarion Datsun

Model No. RN-357F

Serial No. 0005982

Part No. 286-4061-01

A six pin plug goes in the back of it.

Top left........Not used

Middle left....1 wire......White with Black stripe

Bottom left...1 wire......White with Black stripe

(Speaker wires I presume)

Top right.......2 wires....both Black with Green stripe

Middle right...1 wire.....Green with White stripe

Bottom right..1 wire.....Blue with dark Red stripe.

I tried emailing Clarion but did not receive an answer.

Maybe one of you blokes can advise me.

Rick.

Found this at the clarion website:

Clarion uses the industry standard wiring colors. Not every unit will have all of the listed wires

SPEAKERS:

White=left front +

White/Black=left front –

Gray=right front +

Gray/Black=right front –

Green=left rear +

Green/Black=left rear-

Violet=right rear +

Violet/Black=right rear –

POWER/ACCESSORY

Yellow 14ga=battery main/memory

Yellow 18ga=battery CeNet power/memory

Red=accessory (ignition on)

Black=ground

Blue=antenna turn on +

Blue/White=remote turn on (amps) +

Orange/White=dimmer

Brown=phone mute

Orange=parking brake video lockout

White/Red=CCD (camera) input instant on +

http://www.teamclarion.com/SharedWebDBs/clarionsupport.nsf/edl/C1A

Mr C