Hate to be a pain in the butt !!! I just need some closure. The front bumper over -rider measures approx 30 inches c to c but there are two mounting holes on each side of the over-rider. Has any one seen that type I am sure now that it is for a 73 240Z and maybe early 74 260z

Maybe this picture will show the two holes I am talking about on each side of the front bumper over-rider. Promise this will be the last time I will bring up this topic !!!!! Thanks for the help in advance !!!!!

My override bar for my '71 mounts differently. I have two bolts per side, but one is above the bar and one is below.

Not sure what you were asking.

So You are saying there are two bolt holes per side? Plus it seems that these sides are curved not L shaped .:stupid:

Here's what it looks like. As far as I know it came on the car in '71.

This is the way mine looks not the same as yours Laffeaux is this over-rider for a Z or not??:: :This is problem is driving me nuts !!!!!

:stupid:

One more view and that's it !!!! Last post for me on this topic and thanks for any help in advance !!!!!!

I'm sure that the mounting varried by year, as the bumbers changed over the years too. Also, there could easily havbe been several manufacturers. If it gits your car, and you like it, then use it. It's probably from a Z.

I noticed on eBay that there are two of bars listed for sale. Both bars are different and neither matches yours or mine. So I'd guess that there were a lot of different bars all of which were on Z's at some point (all were dealer installed, or aftermarket).

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1856227246

and

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1855529410