Hello, i need help so bad. my 1976 280z refuse to turn on and start. i have checked the fuse box and there is power going to the battery side of the fuse box and no power on the ACC and ignition side. i check the fusible link in the hood. they have power. i have tried two ignition key assembly still having the same problem. some ple help. any info will help. my emails is: gtamba@excite.com. Thanks

******When i turn d key to ACC nothing turns on, and turn to ON nothing comes on and i turn to start nothing but i can hear a click under d dash by the passenger seat*********

Sounds like a bad ignition switch to me. Not the part the key goes in, but the electrical part that attaches to the back of the ignition lock assembly.

Either that, or you have no power going up to the switch, but the clicking sound makes me think that there is power to the switch.

thanks for the info. I checked my Ignition wires. It seem to me that, this is problem has nothing to do with inside the hood but inside the car.

As Arne mentioned, check your Ignition Switch, the portion BEHIND where you put your KEY to start.

I'm thinking the switch itself has slipped or the wiring at the switch has been moved around.

E

Thanks for that info. pls send me a picture or detail description of how the wire look on the back of the socket/harness that goes into the ignition switch.

I've searched for a couple of links:

http://www.classiczcars.com/forums/showthread.php?t=29565

http://www.classiczcars.com/forums/showthread.php?t=25746

The first shows you the switch, and the second discusses the wiring and connections you should be getting. Note that the first post has a problem and you need to read the whole thread before you can see where the problem is.

E