Here is another example of variation within the series 1 cars.

I have two different console finishers, one has the word "on" embossed into the marker switch location, and one does not. Also one has the throttle opening as only 1/2 the slot and taped over while the other has the entire slot open.

My 6/70 is like the one on the right. With the heat symbol being painted and the parking light symbols just embossed in the plastic and not painted.

Mine (10/70) is similar to the left one. The defrost logo is painted, the parking light emblem is not, and the throttle slot is full length, although if you look closely you can still see the remnants of the adhesive from the black tape that covered it way back when.

I just went out and took a second look at my console finisher plate and noticed that my throttle slot is only 3/4 as long as the choke slot.

Anybody seen one like this before?

Build date of my car is 3/70 but i cannot verify if the finisher is original to the car.

Eric

Looks pretty much like one of the two I pictured-I'll see about getting some pictures of the undersides.

Will

Now that I look at it, it looks like the left one without the tape.