I'm getting ready to install my rear interior panels (quarter panels etc) and I've noticed that the vinyl covering the wheel wells isn't glued down. Should I just use Spray 77 or is there a better longer lasting product?

Plus, do I need to do anything to keep the plastic panels from squeaking where they overlap? I don't know that they will but it seems like they might. I'd rather just do the install once...

Thanks, Z

I used 77 on my Z and go to ACE hardware and find the rolls of foam that are about 3/8'' wide that has a peal off backing . I used the stuff that is about 1/4'' thick and I applied it as you said . On the overlap areas and the contact points. Originally from the factory they used a thin foam that was glued in but has rotted away , at least mine had. I HAVE NO SQUEAKS . Gary

I used 77 on my Z and go to ACE hardware and find the rolls of foam that are about 3/8'' wide that has a peal off backing . I used the stuff that is about 1/4'' thick and I applied it as you said . On the overlap areas and the contact points. Originally from the factory they used a thin foam that was glued in but has rotted away , at least mine had. I HAVE NO SQUEAKS . Gary

Cool. Thanks dude. Z

ya...good idea. I was wondering about that.

Zak