hello all.. need a little help. anyone know the proper gap for points on a totally stock 71' 240z?

Should be between 0.45 to 0.55 mm (sorry dont know the gap in inches) for a L24 engine with no emmission controlls (D606-52 distributer), or .30 to .40 for a L24 with emmission controls (D609 56A distributer) I believe.

Dwell angle 35 to 41 degrees.

Spark plug gap .8 to .9mm

Mr C.

thanks for the quick response i'll try them.. i have a conversion chart so mms is fine..

thank you mr camo! ended up being around .50mm, just need to get a valve job and carbs tuned to get her back in sync.