Voltage guage stopped? - Electrical - Classic Z Car Club Skip to content

Voltage guage stopped?

Featured Replies

I've got a 77' 280Z. ˆjust noticed today that the volt meter is reading below 4 (the very bottom of the guage). i know it still is getting power, because the red charge LED lights up when i start the car. Is there an easy way to get this out to see what the problem is. the car starts and runs fine, so i know its the guage. are there some wires i can check? The hazard lights also no longer work.

i have that problem to my volts don't more just sits at the bottom

Sounds like something is dragging the voltage down somewhere. Put a volt meter on your battery without the engine running. i.e no load, take a reading. Then take a reading when the engine is running. i.e when the alternator is charging the battery. You should see about 13volts on charge and about 12 on no load.

Also check the battery cell levels.

Funny things can happen when batteries start to die.

If all is OK then start pulling fuses to try and isolate the circuit that might be at fault. If everything else is OK then someone else might be able to help, I have little knowledge of 77 280 electrics, sorry.

Give it a whirl.

  • Author
it's got good volts but still wont move the needle

same here.

S
Sponsored
Advertisement
Go Ad-Free
No ad showing? Ads help support ClassicZcars. If you use an ad blocker, please consider allowing ads on this site or Go Ad-Free.
  • Author

got it fixed, thanks for the replies!

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.