Search the Community
Showing results for tags 'injection'.
Found 2 results
My apologies if this is a duplicate, the system seems to have just swallowed my carefully crafted posting (telling me I wasn't logged in). Here goes again. I just bought a 1976 280Z as a project car. The body is in good shape but its been partially dismantled. The previous owner took it apart to move some performance parts to his new Z. So it came with the EFI intake/throttle off the car (along with a bag of misc stuff). Exhaust is missing (I have MOTORSPORT TBC Coated 6-1 Header, and MSA premium exhause on order from the Z store). Bumpers are off. Interior taken apart. Drum brakes need work (in-progress - Front disks/calipers look great though). Previous owner upgraded distributor to ZX/electronic, replaced fusible links with fuse block, new dash cap/carpet. My first goal is to get it put back together and running to see what I have. Since the EFI intake/throttle is off the car I decided to replace the injectors (on order) and clamps (one side of the fuel rail had standard hose clamps rather than EFI clamps - looks like one of the injectors was replaced a while back). I have mostly stripped the manifold and would like to give it a good cleaning (along with the throttle which I have removed). What is the best way to clean them inside and out? Carb cleaner and elbow grease? Have it dipped? Something else? Putting it all back together will be an adventure. The previous owner did mark the wiring harness (I will clean all the contacts with deoxit) and I found the Datsun EFI Theory/Troubleshooting book on-line - I think most of my questions will be answered there. I will replace all of the vac hoses and any water/fuel host that doesn't look new (some look newly replaced). I have a new throttle gasket on hand. I will get all new injector hold-down bolts (not screws!) and tighten them appropriately when I reassemble. Any other suggestions while EFI intake is off the car? What would you do? Thanks, Dan PS, Here it is: