JZM

Well?! Jzm..

Anyone else going?Lets take a head count. JZM..

Thank you for the correction, I did not even think about that cross memeber. lots of stuff on my mind.will do better! JZM..

Diff/axle corrections in the pre R-200 have differant mustache bars,these bars look identical but are not the same.bolt holes/cover mount studs are to close together and the bar itself is smaller in comparison.but they still have the curve/axle alighnment correction. JZM..

That would be called the mustache bar. JZM..

The front diff cross member is not needed from the R-200.the R-180 unit will work just fine.And I'm assuming that when you say the rear curved crossmember you mean the mustache bar?the R-200 axle shafts are not needed aswell.but I'ts always nice to have extra parts. JZM..

My bad,,,,,,,,,,,280zx do not have mustache bars!!! Thay are mounted directly to the rear frame via a diff cover with a mount on it. JZM..

NO! JZM..

Yes it will fit.And you will need the mustache bar and the front diff mount for a R-200 Also ck and make sure the front diff flange is the same as what you have in your car,if not you will need to change it out and retorque the nut to spec 122.9 to 144.6 ft-lb.hope this helps out. JZM..

The first set of lights took dave about a month to complete [maybe longer]. tear down,cleaning,inspecting and reassembly.is one thing I know dave is good at [beleave me].when I want somthing done [that he does] for myself or one of my Z car customers I CAN COUNT ON DAVE TO DO MORE THAN HIS BEST.I've never had a dissatisfied cusomer from any of daves work.he has proven time and time again to be the best at what he does.he takes his time and does his projects/work right.That in itself is reason enough for daves high[but low] cost for his products.not that anybody was questioning it. JZM..

Whom ever buys these lights WILL NOT BE DISSATISFIED! i've seen them first hand...bright.....very bright,and they look cool too.Hay dave my birthday is coming up. [in december:D ]..

If dave does not have enough room,I'll take one or both. JZM...

Dave don't forget to come out and pick up the tach adapter and instructions,I also have some goody's for your car before the trip. JZM..

Who else is going? JZM..

Are you jealous?:mad: .....I LOVE YOU TOO MAN:love: .....Feel better?:classic: JZM..

No--but i will help you get it ready,for what is up too you.. JZM..

I will be driving my 1990 300zx from everett washington however I will not be entering it in anything aswell.[it's just not up to my standard of show quality.] Dave you should enter your 240z.Wait maybe we can enter our Z's in the Z cars that drove the longest ways to get to the show! JZM

No need to change the fuel tank.yes on the stock 240/260z fuel pump. also make sure the int/exh gasket you use wiil seal the fuel injector holes,you should'nt have any problems with that though. JZM..

Gee shanks dave.I LOVE YOU TOO MAN. JZM..

Don't forget..dave your also bringing a z car specialist. JZM

Count me in.

Ok i'll keep it to myself...boo hoo. JZM

Oh Did The Poor Baby Get Up In The Wrong Zip Code? ...................fed-x.................................................. Jzm. P.s.ha Ha Ha Ha Ha Ha Ha P.s.s. Are We Still On For The Z Drive Tomorrow?

Gee Shanks!!!!!

DAVE I'll take four units.I'll also need four head light harness's too. {if you'll make some ...PLEASE.} Why so many? so that I/ we can advertise your product at z sport! G.W.W IS VERY IMPRESSED. JZM