zed2

Perhaps the honorable thing for Sport Z Magazine to do is to refund the unpublished prorated subscription fee to each subscriber and allow the subscriber the privilege to decide what magazines he/she prefers to patronize. I am certain an ethical person does not want to feel that they are stealing money from people who purchased a 1,2 or 3 year subscription. Keith

Dan, I'm right there with you. So how do we resolve the ball joint issue regarding the smaller diameter ball joint replacement? Thanks, Keith

There is no USA domestic part number for the seat protector. Several years ago (15-20), the local Nissan Parts Manager sent a request to NMA to determine the part number. Since there were not OEM seat units in the warehouse, NMA could not confirm the existence of a replacement protector. The message the PM received back was that the protector was mounted on the first few USA bound production vehicles and then dropped from production. I have thought over the years about having reproductions produced, but hesitate because there is no certain way of determining a demand. Keith

Jrome, I am patience, thanks for the update. Regards, Keith

Jrome, I'd be interested in the tire (for show purporses only). Let me know if you are interested in selling it. Regards, Keith

Do you have a master brake vacumm booster? Thanks, Keith

Would you please provide the ISBN for this book. Thanks, Keith

Has everyone updated the database at: http://zhome.com/IZCC/ZRegisters/classic.htm

I have the 3 row and it is a direct fit.

I am interested in: '69 - '70 240Z hand throttle cable Let me know the price and shipping to business address in Plano, Texas 75093. Thanks, Keith

If you have to have a 4 row: Well-Built Radiator Mfg. Corp. 17120 Figueroa Gardena, CA 90248 1-800-540-1111 (outside L.A.) #110 2.5" depth 4 row $175 + 13.64 Norma - shipping Ramone - order For a 3 row: Transpro/CSF 800.755.2160 13-3/4 x 23-5/8 x 2-1/16 - 3 row

For those of you who are familiar with the Series 1 ball joint have discovered that in 7/70 Nissan changed the size of the ball joint from a 11mm thread to a 14mm thread. Since the 11mm thread is has not been available from Nissan for at least 20 years, this change requires the Series 1 owner to replace the steering knuckles to accommodate the 14mm size. Naturally, this change affects the originality of a restoration project. I have been approached by an aftermarket vendor who has approximately 16 NOS of the 11mm thread ball joints in a warehouse. He is interested in selling as one lot for $75.00 per unit. (Comparable aftermarket price of the 14mm thread is approximately $40-$45 per unit.) Now comes the question; should I buy the old stock and offer them for sale at a price of $95.00? (I do currently have 4 old stock that I purchased years ago for my personal use.) What are your thoughts? I do not want to become a vendor of old parts, nor do I want to gouge someone when it comes time to sell them. Life is too short to leave someone with the impression that they have been ripped-off! Thanks, Keith

I have a few new 11mm ball joints in my spare parts box. (They are not Datsun/Nissan but rather oem replacements.) How many do you need? Keith

I am looking for a 1970-6/72 core for a rebuild. If anyone has an old one that they are going to throw away, I will pay for the shiiping to get it to me. Thanks, Keith

Here is a source: http://www.priorreman.com Keith

I assume it has a clear title (the owner used to be a car dealer). I need the radiator, master brake vacuum, weather stripping (NOS in box), carpets (NOS in box), and some rubber trim. I have no interest in the red seats or interior trim. Keith

Sorry for the confusion, the engine and trans are with the Z, but they are not installed.

I have located a 1972 240Z that has extensive rust. For what it is worth, the owner says the car ran fine before he pulled the engine/trans. The rust is so extensive that it is not worth putting back together. The red interior seems in good shape as well as the glass. (There are a few parts I would like, but do not have the room to disassemble the car.) Does anyone in the Dallas area have an interest in parting it out and selling the parts? Currently, the seller wants $900, and I have not discussed the real value of the 240Z in its current condition. Let me know. Keith

I've been a member for 17 years, nice group of people.