hls30.com

...and a can of spray silicone lubricant! Will

Victor, What is that striking replacement for the fuzzy dice? Will

I am putting the battery in the pass. side tool box (Fabbing a box and using a battery made for a Volvo S80-vents through a hose). Those of you with long term Z ownership have probably noticed that if you aren't religious about rotating your tires the pass. side rear wears the fastest. The reason for the accellerated wear is that tire has the least weight on it(unless you carry a passenger), and tends to spin first. Putting the battery(30-40 lbs+ the box) right in front of the rear wheel will add to its traction. Will

Sorry about that, I should have posted the link as well. Charley Osborne is the owner, good Guy! Tell him we sent you! Will

What do you know about where your car came from? Will

And trouble shoot!!! Will

Carl, I will see if I can round up one Monday evening(My wife has been off all week, and I have been comandeered for baby shower preparation since I didn't take her to the Emerald Coast for the week.) My wife goes back to work on Monday,and I just might be able to at least touch some old car parts then! If it weren't for the delivery from VB, and running out to check the wiper arms, I would have had a parts-less week! If I can put my hands on one, I will set up the video camera, and shoot some mpeg for a technical article. I'll PM you shortly. Will

I sure hope that some qualified mechanic checks out their "work* before they turn the key! I don't mind the Darwinian trial takeing them out-but someone else might get hurt-of course, it could be the reporter who wrote the article, and didin't check the facts. WIll

Carl, I have taken the thin apart, not nearly as difficult and getting it back together, but fortunately it didn't work before I took it apart either... I would try using contact cleaner in te switch before taking it apart. I actually did get mine working and properly reinstalled-it actually isn't that difficult.-souunds like a good technical article though! Will

1) Zedd Findings Frame rail kit approximately $350 with shipping Excellent Replacements for damaged rails-both sides. 2) Rust treatment, POR15, ZeroRust, Corroless, etc Follow the directions on which ever treatment you use to the letter. 3) Treat the entire floor and the newly installed rails, inside and out. Make sure you are careful in the prep-work. 4) Never worry about your floors/framerails again! Will

Make sure the keys make it into your hands! Take hold and don't let go! Will

One more pass just to make sure everybody got a chance to "unload" their old parts!

If you get one, it won't be long after it is done you will have to have two-just ask 26thZ! You'll need two, so both of you can drive! Welcome to the Z community! Will

Original dashes and those that have been re-done by Dash Restoration feel somewhat pliable. They have some "give" to the surface-they are built up with scolpted foam! They crack as they dry out and become hard as they shrinkfrom drying out. Will

I don't know about the rest of you, but it just doesn't feel even close to the same with protection! If I am going to do it, I want all the feeling I can get! I don't see our form of protection as being effective-maybe we should try the patch!! Will ...Sorry, I just couldn't contain myself...maybe that's why we are expecting!

Carl, I just received an order from VB, among my car toys were 4 pristine ss wiper nuts! I had put them on my order and forgotten them-anyway, still available in thew US, but not available in Canada. I will check the other wiper arms over the weekend. Will

I'm sure "Newbie" could find a station wagon to trade... :stupid: Will

Think about how much damage would REQUIRE the cost of, and the work to install that piece. Most Zs worth restoring need frame rails, floors, seat mounts, or some combination of all three-not counting cosmetic repair. That piece is valuable, but probably not practical considering the cost including shipping, and the cost of having it installed-not a job for a guy with a welder and 4 cinder blocks-cutting out that much floor really takes away the strength of the car, not to mention a car that damaged would probably not have rockers either. Will P.S> unless you are going to mount seats in it for your livingroom, I am not sure your decoration could do it justice!

I agree that not having them ""right clickable" would slow most people down, and I like MikeWs idea, but unfortunately, each poster already has that power in making the choice to upload or not. People have tried locks before (ebooks, etc...) and found that they did not work. At this point in technology, no image is safe-if there was a way to ironclad a copyright for something in general circulation, there would be no counterfitting. Any picture you put on the web can be taken. If it is accessable, it can be captured and posted anywhere else. While I am not saying look at porn, if you check out the industry, the only way they have slowed down the unpaid spread of their images is through the use of paid hidden doorways, and passwords. Even so, an article I read somewhere said that an image is available only on the license holders site(s) for an average of 4 hours. Look to the numbers quoted by the music industry. Every attempt at general circulation insures theft and misuse. I am not going to stop posting pictures for fear some numbnut will steal my images and use them for some plot to rule the world. I post them with the expectation that I iwill find them somewhere else! I post the pictures for the members here, to share what I have done and to get feedback. If you want to keep control over the use of your pictures, limitting access to them is the only sure way I can see. Will Any attempt is better than no attempt.

Among the EFI goodies I have bought, several sets of the new "pushbutton" connector housings, and even the crimpable connectors that fit them(not a pigtail, but the actual connector for crimping to your own wire. firewall grommits, and more than I can think of, came from http://www.jimsperformance.com/carti.html . Jim is great to work with, he uses the stuff he sells, and knows that it works. His prices are very reasonable, and he does not mind sharing his knowledge. Will

Carl, mine from the '72 match your first variety. I have several spare sets- I can check them if you would like. Will

Carl, I'll measure them (an check part# stamps)this afternoon and get back to you. Will

Carl, More pictures, great! I don't know the story, but I just ordered a set of the wiper arm nuts from Charley Osborne, and He said the black nuts were still available, and were probably ss underneath, but he had not been able to get the ss finished ones for a while. All of the Zs I have had have fallen into your timeline in terms of what wiper hardware they came with. Tomohawk, Appliance epoxy paint or powder coat. Will

I need one-make that two, for a '72. I bought one off Ebay recently that was advertised as clean, and better than the picture. 3/4 of it is perfect, but the two bubbled burns(that could not be seen in the picture) on it sort of distroy the visual beauty. Will

I need a shifter plate(indicatesthe gear the car is in) for an automatic 240Z. All you guys who have converted to 4 or 5speeds, where are the left overs? I am actually after 2 in very good to NOS shape. Thanks for any help-or leads! Will