motorman7

Thanks Arne! Started to second guess pops here after seeing the e-bay ad. The amazing thing about that rubber dipped cloth stuff is it seems to be in real good condition. It does not seem to harden like the braided hose does. Wonder if they still make that type of hose. Best Regards, Rich

What's the original "hose style" for the 240Z fuel hoses that are under the hood (hoses going from fuel rail to carbs, fuel filter to rail, etc)? I was pretty sure that mine were original, and they are not braided. I saw some on e-bay that were braided so I am now questioning. My hoses do not appear to be an off the shelf rubber fuel hose. The hoses on my car seem to be almost like some rubber coated cloth material style. Are these original? The EGR hose is made of the same material. Were the original ones braided? TIA, Rich

And here are the bumpers. Quite nice for $300. Now if I could just get the paint job for that price

The turn out was great. It was nice to socialize with all of the Datsun fans there. One of the best aspects of the show was the Datsun parts swap meet. What a great selection. I picked up a set of Series I chrome bumpers in great shape, complete with rubber for $300 total. Incredible deal-couldn't pass them up. Will post picks of them tonight.

Perfect weather for a nice Z gathering today. 75 degrees and sun shine.

Well, here are my before and after pics or the radiator hoses. I removed the naked ones and put on the new braided ones from Espirit. The braided hoses were very nice and flexible. I did have to cut about an inch off the top radiator hose to get the right natural curve. Now the only thing that needs the fix are the two heater hoses. I am still operating with the original braided brake booster hoses, EGR, and fuel hoses. The brake booster hoses are pretty stiff and a bit frayed as is the EGR, but the fuel hoses are still supple and appear to be in great shape (not braided but appear cloth re-inforced). Think I'll put the bare hoses up on e-bay. They are only 1 year old.

Just ordered mine through Paypal. Thanks again for all your hard work on this Espirit! My 70Z will be thrilled. Rich

Anybody planning on going to this? I'll be there. Was debating on which Z to take. Will most likely take the 70 only 'cause it needs to be taken out for a run. She's getting a little antsy. Hopefully I can pick up a nice drivers side fender there for my 71Z. My current one has a rust hole in the base (bondo'd now) and I'd like to replace before painting. Plan is to paint the 71 Z similar to the color shown on the Z below. The car show is people's choice (which I hate:sick:). Nice event to socialize at though. Good way to start 2010. Rich

http://www.classiczcars.com/forums/showthread.php?t=35670&highlight=cam+timing+pics nice pics here

Lacquer thinner works far better than paint thinner. It is serious stuff. I use it to remove the overspray on most parts. I do like to condition the rubber or vinyl afterwords with vinyl/leather conditioner.

I have way too many Z plans this year, but I will start off with a small list: For the 70Z: I will replace the engine radiator hoses and heater hoses with braided hose when Espirit makes them available. Nothing else will be touched. I will bring the car to the MSA West Coast Nationals and will also try to get it to Nashville for the ZCON. Otherwise, she will nest in her cocoon. For the 71Z: The plan is to paint the car Nissan yellow (same color as current 370Z) at the end of Feb or early March. I am planning on spending 4 days stripping the car of almost everything (engine, glass, etc) and taking a rolling chassis to Maaco for the paint job. I then plan to go through the car replating bolts and cleaning parts. Very happy with the interior and the way the car is running. Now just need to make it look pretty. Will continue to look for a nice 70Z with original engine on Craigslist here in SD to add as another project. You can never have too many projects. Rich

...Definitely unique, but not sure how it will handle in the corners. Of course a good paint job will cure just about anything! Rich

Congrats on the new purchase and welcome to the club. There is a good group of Z owners in SoCal so planty of people to get advice or help from (if needed). Thanks for posting the pics. Rich

Yes, with the Tokico springs (I am assuming 5020's) no spring compressor required. Had them on my 71 at one time. Rich

Here is the color of my block with the CDM paint for reference.

Also, the position of the rod that goes from the oil pump to the cam gear to the distributor is very important. The key for the distributor must be as shown in the picture at engine TDC. This will make timing easy. Make sure it is not 180 out. Rich

http://www.classiczcars.com/forums/showthread.php?t=35670&highlight=cam+timing Check this thread. Should help. Rich

Sweet pics! Very nice job. You really have a gorgeous car. Rich

Welcome to the board! As always, post some pics. Would love to see your Z. Rich

Seems to be a lot of differences between the two cars: Exhaust sytem, Sac car is lowered, window tinting, rubber on bumper, different tires, engine bay color, decals, Bre on Sac spolier, Datsun on SD spoiler,..etc. I am sure there is more i am missing